ACTiSYS CAM-6500 user manual Threshold, IR Colour, Alarm Detect 18x Model Only, Detect Switch

Page 68

♦ON

Select the item to remove the IR cut filter.

¾23x MODEL

IR FUNCTION
THRESHOLD	LOW
IR COLOR	COLOR
EXIT	YES

♦AUTO

The internal circuit will automatically decide the occasion to remove the IR cut filter according to the image brightness level.

THRESHOLD

The speed dome will remove the filter immediately when the threshold value is reached. The threshold options are <LOW>, <MID> and <HI>. <LOW> threshold indicates a higher sensitivity and can improve the reliability of lens.

IR COLOUR

When IR function is enabled, the video output can be programmed as colour or B/W.

♦ON

Select the item to remove the IR cut filter.

B-3-18 ALARM DETECT (18x MODEL Only)

This function instructs the camera to detect movement within the monitoring area and then send an alarm signal automatically. To activate this function, alarm connection setups most be completed in advance.

ALARM DETECT
DETECT SWITCH	OFF
DETECT MODE	INT. FOCUS
EXIT	YES

♦DETECT SWITCH

The item is used to enable or disable the ALARM DETECTION function.

63

Image 68

Contents Hardware User’s Manual Liability CopyrightTrademarks FCC/CE Regulation Table of Contents Page Introduction Day/Night Features Precise and Accurate TrackingPerfect Contrast Solution for High Image Quality QoS Enabled Video StreamingLow-Light Application Privacy Mask for Privacy ProtectionBundle Powerful Surveillance Software Dynamic Dome ConfigurationDdns Supported Build-in Hardware Motion DetectionDon’t use the power supply with other voltages Don’t open the housing of the product CleaningDamage Requiring service AttachmentsSafety Check Reset Button Communication Switch SettingDome ID Setting Dome Control ProtocolPin Connector for LAN/WAN Pin ConnectorMounting the IP High Speed Dome Basic Connections In-Ceiling Mount Optional AccessoriesSurface Ceiling Mount Indoor Mount Kit Ceiling PanelTransparent Cover/Smoke Cover Corner Standard Mounting Plate Gooseneck TubeStraight Tube Pole Thin Direct Mounting Pole Wide Direct MountingCorner Thin Box Corner Wide BoxWall Box Mounting Pole Thin BoxPole Wide Box Repeater/Converter Stainless Steel StrapsStainless Strap Cutter Power Adapter Connector Box Indoor ApplicationPower Box Ceiling Mount Tools Needed Surface Ceiling MountingItems Needed Drill these holes on the surface ceiling Ceiling Panel for In-ceiling Mounting In-ceiling Mounting StepPut up the T-Bar into the ceiling hole Step Ceiling Mount with Straight Tube Wall Mount Wall Mounting with Gooseneck TbleWall Box Mounting Corner Mount Corner Standard Mounting PlateCorner Thin/Wide Box Mounting Pole Mount Pole Thin/Wide Direct MountingPole Thin/Wide Box Mounting ¾ 18x Model OSD Setup MenuOSD Display Format Camera Backlight Home Cruise ¾ 22x Model / 23x Model ScheduleManual Aperture Enter Exit YES Sequence Line WDR Configuration Menu Default Camera BacklightFocus ¾ 18x Model AutoManual ¾ 22x Model / 23x Model AutoAuto AE ModeAperture Bright ShutterGain IrisIndoor WBC ModeAGC ID Display OutdoorATW Setup Menu OFF18x Model 22x Model / 23x ModelSpeed by Zoom ImageZoom Speed Slow Shutter Auto CalibrationDigital Zoom Angle Adjuster ResetSetup MENU2 18x Model Only ¾ 23x ModelMask Display FirstLast Title DisplayTitle Setting Title ABCAlarm Setting Alarm PINAlarm Switch Alarm TypeAlarm Action PresetHome Setting SequenceReturn Time Select ModeHome Function Preset Position SeqenceSequence Line Sequence PointDwell Time RUN Sequence Autopan Line Start PointEND Point DirectionRUN Autopan Record Start Record ENDRUN Cruise IR Function Removable IR CutAlarm Detect 18x Model Only Detect SwitchThreshold IR ColourDetect Mode INT. FocusFIX Focus INT. AEPrivacy WDR SwitchWDR Function Privacy Switch TransparencyColour SET MaskSize 00 ~ ShadeSIZE000 ~ Mask CLEAR+RESETCENTER000 ~ Time Function Time DisplayYear / Month / DAY Hour / MinuteSchedule Switch Schedule ModeSchedule Point Schedule Hour / Minute