ACTiSYS CAM-6500 user manual WDR Switch, WDR Function, Privacy

Page 70

WDR SETTING
WDR SWITCH	OFF
WDR FUNCTION	AUTO
EXIT	YES

♦WDR SWITCH

Enable or disable the WDR function with the item.

♦WDR FUNCTION

The item is used to define the WDR function mode.

AUTO

If select <AUTO>, the speed dome camera operates the WDR function automatically.

MANUAL

Users are allowed to adjust WDR function manually by defining the RATIO LEVEL, SHUTTER SPEED and IRIS OFFSET value.

WDR MODE
RATIO LEVEL	000
SHUTTER SPEED	000
IRIS OFFSET	000
EXIT	YES

♦EXIT

Exit this setup menu.

B-3-20 PRIVACY

The Privacy Mask function aims to avoid any intrusive monitoring. Users can adjust the camera view position, and adjust the mask size and area. The speed dome camera will memorize the center of the selected view as an original point, so it will be locked as users enter the Privacy Setup menu. Refer to the description for setting Privacy masks.

NOTE: The Image Flip function will be disabled automatically while the Privacy function is enabled.

65

Image 70

Contents Hardware User’s Manual Trademarks CopyrightLiability FCC/CE Regulation Table of Contents Page Introduction Day/Night Features Precise and Accurate TrackingLow-Light Application Perfect Contrast Solution for High Image QualityQoS Enabled Video Streaming Privacy Mask for Privacy ProtectionDdns Supported Bundle Powerful Surveillance SoftwareDynamic Dome Configuration Build-in Hardware Motion DetectionDamage Requiring service Don’t use the power supply with other voltagesDon’t open the housing of the product Cleaning AttachmentsSafety Check Reset Button Communication Switch SettingDome ID Setting Dome Control ProtocolPin Connector for LAN/WAN Pin ConnectorMounting the IP High Speed Dome Basic Connections Surface Ceiling Mount Optional AccessoriesIn-Ceiling Mount Transparent Cover/Smoke Cover Ceiling PanelIndoor Mount Kit Straight Tube Gooseneck TubeCorner Standard Mounting Plate Pole Thin Direct Mounting Pole Wide Direct MountingCorner Thin Box Corner Wide BoxPole Wide Box Pole Thin BoxWall Box Mounting Stainless Strap Cutter Stainless Steel StrapsRepeater/Converter Power Box Connector Box Indoor ApplicationPower Adapter Ceiling Mount Items Needed Surface Ceiling MountingTools Needed Drill these holes on the surface ceiling Ceiling Panel for In-ceiling Mounting In-ceiling Mounting StepPut up the T-Bar into the ceiling hole Step Ceiling Mount with Straight Tube Wall Mount Wall Mounting with Gooseneck TbleWall Box Mounting Corner Mount Corner Standard Mounting PlateCorner Thin/Wide Box Mounting Pole Mount Pole Thin/Wide Direct MountingPole Thin/Wide Box Mounting OSD Display Format OSD Setup Menu¾ 18x Model Camera Backlight Home Cruise ¾ 22x Model / 23x Model ScheduleManual Aperture Enter Exit YES Sequence Line WDR Configuration Menu Default Camera BacklightManual Focus¾ 18x Model Auto ¾ 22x Model / 23x Model AutoAperture AE ModeAuto Gain BrightShutter IrisAGC WBC ModeIndoor ATW OutdoorID Display 18x Model Setup MenuOFF 22x Model / 23x ModelZoom Speed ImageSpeed by Zoom Digital Zoom Auto CalibrationSlow Shutter Setup MENU2 18x Model Only Angle AdjusterReset ¾ 23x ModelLast Mask DisplayFirst Title DisplayTitle Setting Title ABCAlarm Switch Alarm SettingAlarm PIN Alarm TypeHome Setting Alarm ActionPreset SequenceHome Function Select ModeReturn Time Sequence Line Preset PositionSeqence Sequence PointDwell Time RUN Sequence END Point Autopan LineStart Point DirectionRUN Autopan RUN Cruise Record StartRecord END IR Function Removable IR CutThreshold Alarm Detect 18x Model OnlyDetect Switch IR ColourFIX Focus Detect ModeINT. Focus INT. AEWDR Function WDR SwitchPrivacy Colour Privacy SwitchTransparency SET MaskSize 00 ~ ShadeCENTER000 ~ Mask CLEAR+RESETSIZE000 ~ Year / Month / DAY Time FunctionTime Display Hour / MinuteSchedule Point Schedule SwitchSchedule Mode Schedule Hour / Minute