ACTiSYS CAM-6500 user manual Dwell Time RUN Sequence

Page 64

setup speed range is from 1 ~ 15. Refer to below table for more information.

	PAN (degree/sec.)	TILT (degree/sec.)
Speed 1	10	8
Speed 2	23	12
Speed 3	35	22
Speed 4	45	30
Speed 5	55	40
Speed 6	65	50
Speed 7	75	58
Speed 8	185	185
Speed 9	205	210
Speed 10	225	240
Speed 11	250	275
Speed 12	280	305
Speed 13	320	335
Speed 14	365	365
Speed 15	400	400

♦DWELL TIME

The DWELL TIME is the duration time that the speed dome will stay at the sequence point, and the range is from <0> to <127> seconds. The speed dome will go to the next sequence point when the DWELL TIME is up. If the setting is <0>, the speed dome will stay at this sequence point until users manually move the speed dome.

♦RUN SEQUENCE

User can command the speed dome camera to run the selected Sequence line manually.

♦EXIT

Select the item to exit the SEQUENCE menu.

B-3-15 AUTOPAN

Auto-pan means rotating or scanning side-to-side motion by a speed dome camera to view an area horizontally. The parameters can be set on this page.

59

Image 64

Contents Hardware User’s Manual Trademarks CopyrightLiability FCC/CE Regulation Table of Contents Page Introduction Day/Night Features Precise and Accurate TrackingPerfect Contrast Solution for High Image Quality QoS Enabled Video StreamingLow-Light Application Privacy Mask for Privacy ProtectionBundle Powerful Surveillance Software Dynamic Dome ConfigurationDdns Supported Build-in Hardware Motion DetectionDon’t use the power supply with other voltages Don’t open the housing of the product CleaningDamage Requiring service AttachmentsSafety Check Reset Button Communication Switch SettingDome ID Setting Dome Control ProtocolPin Connector for LAN/WAN Pin ConnectorMounting the IP High Speed Dome Basic Connections Surface Ceiling Mount Optional AccessoriesIn-Ceiling Mount Transparent Cover/Smoke Cover Ceiling PanelIndoor Mount Kit Straight Tube Gooseneck TubeCorner Standard Mounting Plate Pole Thin Direct Mounting Pole Wide Direct MountingCorner Thin Box Corner Wide BoxPole Wide Box Pole Thin BoxWall Box Mounting Stainless Strap Cutter Stainless Steel StrapsRepeater/Converter Power Box Connector Box Indoor ApplicationPower Adapter Ceiling Mount Items Needed Surface Ceiling MountingTools Needed Drill these holes on the surface ceiling Ceiling Panel for In-ceiling Mounting In-ceiling Mounting StepPut up the T-Bar into the ceiling hole Step Ceiling Mount with Straight Tube Wall Mount Wall Mounting with Gooseneck TbleWall Box Mounting Corner Mount Corner Standard Mounting PlateCorner Thin/Wide Box Mounting Pole Mount Pole Thin/Wide Direct MountingPole Thin/Wide Box Mounting OSD Display Format OSD Setup Menu¾ 18x Model Camera Backlight Home Cruise ¾ 22x Model / 23x Model ScheduleManual Aperture Enter Exit YES Sequence Line WDR Configuration Menu Default Camera BacklightFocus ¾ 18x Model AutoManual ¾ 22x Model / 23x Model AutoAperture AE ModeAuto Bright ShutterGain IrisAGC WBC ModeIndoor ATW OutdoorID Display Setup Menu OFF18x Model 22x Model / 23x ModelZoom Speed ImageSpeed by Zoom Digital Zoom Auto CalibrationSlow Shutter Angle Adjuster ResetSetup MENU2 18x Model Only ¾ 23x ModelMask Display FirstLast Title DisplayTitle Setting Title ABCAlarm Setting Alarm PINAlarm Switch Alarm TypeAlarm Action PresetHome Setting SequenceHome Function Select ModeReturn Time Preset Position SeqenceSequence Line Sequence PointDwell Time RUN Sequence Autopan Line Start PointEND Point DirectionRUN Autopan Record Start Record ENDRUN Cruise IR Function Removable IR CutAlarm Detect 18x Model Only Detect SwitchThreshold IR ColourDetect Mode INT. FocusFIX Focus INT. AEWDR Function WDR SwitchPrivacy Privacy Switch TransparencyColour SET MaskSize 00 ~ ShadeCENTER000 ~ Mask CLEAR+RESETSIZE000 ~ Time Function Time DisplayYear / Month / DAY Hour / MinuteSchedule Switch Schedule ModeSchedule Point Schedule Hour / Minute