Thank YOU, Precautions | Kenwood NXR-710 instruction

VHF DIGITAL BASE-REPEATER/ UHF DIGITAL BASE-

EPEATER

NXR-710/

NXR-810

09 08 07 06 05 04 03 02 01 00

INSTRUCTION MANUAL

THANK YOU!

The AMBE+2TM voice coding Technology embodied in this product

is protected by intellectual property rights including patent rights,

We are grateful you purchased this Kenwood repeater. We

copyrights and trade secrets of Digital Voice Systems, Inc. This voice

believe this easy-to-program repeater will be highly effective in

coding Technology is licensed solely for use within this Communications

your communications system, and will keep personnel operating

Equipment. The user of this Technology is explicitly prohibited from

at peak efficiency.

attempting to extract, remove, decompile, reverse engineer, or

disassemble the Object Code, or in any other way convert the Object

Code into a human-readable form. U.S. Patent Nos. #5,870,405,

PRECAUTIONS

#5,826,222, #5,754,974, #5,701,390, #5,715,365, #5,649,050,

#5,630,011, #5,581,656, #5,517,511, #5,491,772, #5,247,579, #5,226,084

and #5,195,166.

• Do not expose the unit to rain or moisture; to prevent fire or

electric shock.

Firmware Copyrights

• Do not open the unit under any circumstances; to avoid risk

The title to and ownership of copyrights for firmware embedded in

of electric shock.

Kenwood product memories are reserved for Kenwood Corporation.

• Do not expose the unit to long periods of direct sunlight, nor

place it close to heating appliances.

UNPACKING AND CHECKING EQUIPMENT

• Do not place the unit in excessively dusty and/or humid

areas, nor on unstable surfaces.

Note: The following unpacking information is for use by your Kenwood

• If you detect an abnormal odor or smoke coming from the

dealer, an authorized Kenwood service center, or the factory.

unit, disconnect the power from the unit immediately. Contact

Carefully unpack the repeater. We recommend that you identify

your Kenwood service center or dealer.

the items listed in the following table before discarding the

packing material. If any items are missing or have been damaged

NOTICES TO THE USER

during shipment, file a claim with the carrier immediately.

Item

Part Number

Quantity

◆ Government law prohibits the operation of unlicensed radio

Hardware fixture

J21-8559-XX

transmitters within the territories under government control.

Front glass

B10-2635-XX

◆ Illegal operation is punishable by fine and/or imprisonment.

Name plates

B11-1259-XX

◆ Refer service to qualified technicians only.

Cushion

G13-1801-XX

Cushion

G13-1802-XX

Foot

J02-0475-XX

◆ This repeater is intended for use as a fixed base station with

Foot

J02-0492-XX

Grommet

J59-0302-XX

the antenna located outdoors on the rooftop or on an antenna

tower.

Handle

K01-0418-XX

This repeater is designed for a 13.2 V DC power source!

Screws

N30-4006-XX

Never use a 24 V DC or higher source to power the repeater.

Screws

N35-3006-XX

◆ Use only the supplied DC cord.

DC cord

E30-3427-XX

◆

Do not remove the ferrite core attached to the DC cord. Doing

Lead wire with connector (15 pin)

E31-3228-XX

so may cause interference with radio communications.

Fuse

F05-1537-XX

Information on Disposal of Old Electrical and Electronic Equipment and

Instruction Manual

B62-2200-XX

Batteries (applicable for EU countries that have adopted separate waste

collection systems)

INSTALLATION

Products and batteries with the symbol (crossed-out wheeled bin) cannot

be disposed as household waste.

To install the handles onto the front panel of the repeater, align

Old electrical and electronic equipment and batteries should be recycled at

a facility capable of handling these items and their waste byproducts.

the handles with the holes on the front panel, then secure the

Contact your local authority for details in locating a recycle facility nearest

handles using the supplied screws.

to you.

Please consult your dealer for installing the repeater and

Proper recycling and waste disposal will help conserve resources whilst

preventing detrimental effects on our health and the environment.

antenna.

Notice: The sign "Pb" below the symbol for batteries indicates that this

MICROPHONE

battery contains lead.

NOTIFICATION

Connect an optional KMC-30, KMC-35, KMC-27A, KMC-27B,

or KMC-9C Kenwood microphone to the MIC jack on the front

This equipment complies with the essential requirements of Directive

panel.

1999/5/EC.

The use of the warning symbol means the equipment is subject to

restrictions of use in certain countries.

This equipment requires a licence and is intended for use in the

countries as below.

ISO3166