Freedom Inverter/Charger Configuration
To adjust the alarm setting:
By default the alarm is set to ON.
ON (“”) will sound the alarm on all warning and fault conditions. OFF (“”) will mute the alarm.
1.Press and hold the Inverter Power button for five seconds.
2.Press the Inverter Power button twice.
The LED screen will flash “” intermittently.
3.Press the Select button once.
The LED screen will display the present (or most recent) alarm setting. Example, “” for an inverter mode setting of ON.
4.Continue pressing the Select button to cycle through the two settings – “” and “” until you reach the desired setting.
5.Press and hold the Select button for five seconds to make the setting permanent.
To adjust the low battery shutdown setting:
By default the low voltage setting is set to Low (“”).
Low (“”) sets the low battery shutdown threshold to 11.8 V for the Freedom HF 1800 T only. Low (“”) sets the low battery shutdown threshold to 10.5 V for the rest of the models.
High (“”) sets the low battery shutdown threshold to 12.1 V for the Freedom HF 1800 T only. High (“”) sets the low battery shutdown threshold to 11.8 V for the rest of the models.
1.Press and hold the Inverter Power button for five seconds.
2.Press the Inverter Power button three times. The LED screen will flash “” intermittently.
3.Press the Select button once.
The LED screen will display the present (or most recent) low voltage setting.
Example, “” for a low shutdown voltage setting.
4.Continue pressing the Select button to cycle through the two settings – “” and “” until you reach the desired setting.
5.Press and hold the Select button for five seconds to make the setting permanent.
To return all feature settings to factory default settings:
1.Press and hold the Inverter Power button for five seconds.
2.Press the Inverter Power button four times. The LED screen will flash “” intermittently.
3.Press and hold the Select button for five seconds to return all feature settings to their factory default settings.
13 |