Safety Rules for Circular Saws, Service

SM 1619X04759 11-12_SM 1619X04759 11-12.qxp 11/20/12 2:05 PM Page 3

Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.

Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.

Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use.

Many accidents are caused by poorly maintained power tools.

Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.

Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.

Service

Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.

Safety Rules for Circular Saws

!WARNING Read all safety warnings and all instructions.

Cutting procedures

!DANGER Keep hands away from cutting area and the blade.

Keep your second hand on auxiliary handle, or motor housing. If both hands are holding the saw, they cannot be cut by the blade.

Do not reach underneath the workpiece. The guard cannot protect you from the blade below the workpiece.

Adjust the cutting depth to the thickness of the workpiece. Less than a full tooth of the blade teeth should be visible below the workpiece.

Never hold piece being cut in your hands or across your leg. Secure the workpiece to a stable platform. It is important to support the work properly to minimize body exposure, blade binding, or loss of control.

Hold the power tool by insulated gripping surfaces only, when performing an operation where the cutting tool may contact hidden wiring or its own cord.

Contact with a "live" wire will also make exposed metal parts of the tool “live” and could give the operator an electric shock.

When ripping, always use a rip fence or straight edge guide. This improves the

accuracy of cut and reduces the chance of blade binding.

Always use blades with correct size and shape (diamond versus round) of arbor holes. Blades that do not match the mounting hardware of the saw will run eccentrically, causing loss of control.

Never use damaged or incorrect blade washers or bolt. The blade washers and bolt were specially designed for your saw, for optimum performance and safety of operation.

Inspect the condition and quality of the wood and remove all nails from lumber before cutting. Wet lumber, green lumber or pressure treated lumber require special attention during cutting operation to prevent kickback.

Hold the saw firmly to prevent loss of control. Figures in this manual illustrate typical hand support of the saw.

Depending upon use, the switch may not last the life of the saw. If the switch should fail in the “OFF” position, the saw may not start. If it should fail while the saw is running, the saw may not shut off. If either occurs, unplug the saw immediately and do not use until repaired.

-3-

MAG77LT specifications

The Skil MAG77LT is a powerful and versatile tool designed for both professional contractors and DIY enthusiasts. This magnesium-framed circular saw is a standout in the market, combining lightweight design with the ability to handle tough cutting tasks with ease. Weighing just 8.5 pounds, the MAG77LT is among the lightest saws in its class, making it easy to transport and maneuver, especially during extended use.

One of the key features of the Skil MAG77LT is its robust 15-amp motor, which delivers an impressive speed of up to 5,300 RPM. This high speed ensures that the saw can make quick and clean cuts through various materials such as plywood, laminate, and hardwood. The tool is equipped with a 7-1/4 inch carbide-tipped blade, which not only enhances cutting efficiency but is also durable enough to withstand rigorous use.

Featuring a magnesium housing, the MAG77LT is designed for maximum durability without sacrificing weight. Magnesium is known for its strength-to-weight ratio, making this saw resistant to significant wear and tear. The ergonomic design of the tool also includes a comfortable grip, allowing users to maintain control even during extended cutting sessions.

Another notable technological advancement in the Skil MAG77LT is its built-in dust blower, which helps keep the cutting line clear of debris. This feature enhances visibility and precision, ensuring that users can make accurate cuts without interruptions. The saw also includes an adjustable bevel capacity that allows for precise angled cuts, with settings ranging up to 56 degrees.

Further enhancing its usability, the Skil MAG77LT features an integrated safety switch. This ensures that the saw won't accidentally start, providing an extra layer of protection for the user. Additionally, the saw's power cord is designed to be flexible, reducing the risk of tangling and allowing for greater freedom of movement while cutting.

In summary, the Skil MAG77LT is a top-tier circular saw that beautifully marries lightweight design with powerful performance. It caters to a wide array of cutting tasks, making it an ideal choice for both professionals and DIYers. With features like a powerful motor, durable magnesium construction, versatile bevel adjustments, and user-friendly safety features, the MAG77LT continues to stand out as a reliable and efficient cutting tool in the market.