Graco 24P822 important safety instructions Setup Screen 6 Key, Setup Screen 7 Key

Setup Screens

Setup Screen 6 Setup Screen 7

Use this screen to view the grand totalizer value and set or reset the batch totalizer.

Figure 28 Setup Screen 6

Figure 29 Reset the Totalizer

Setup Screen 6 Key

Enter the screen to set or change preferences.

Grand Totalizer - displays the current grand total of pump cycles. Not resettable.

Batch Totalizer - displays the batch total in selected volume units.

Reset Batch Totalizer - resets the batch totalizer to zero.

Press to accept the selections.

Exit data editing.

Use this screen to set the desired maintenance interval (in cycles) for each pump. The screen also displays the current cycle count. An Advisory is issued when the counter reaches 0 (zero).

Figure 30 Setup Screen 7

Setup Screen 7 Key

Enter the screen.

For systems with multiple pumps and one display, select the desired pump (1 to 8), using the pull-down menu.

Set the desired maintenance interval (in cycles) for each pump.

Press to accept the selections.

Exit the screen.

3A2527D 23