Setup Screens
Setup Screens 8 and 9
Use these screens to set up the pressure transducers. The screens are identical, except Screen 8 is for transducer 1 and Screen 9 is for transducer 2. Selecting a transducer and a pump activates closed loop pressure control.
Figure 31 Setup Screens 8 and 9 (Screen 8 shown)
Setup Screens 8 and 9 Key
Select from the dropdown options to enable the transducer.
For systems with multiple pumps and one display, select the desired pump (1 to 8), using the
Enter the calibration scale factor from the transducer label.
Enter the calibration offset value from the transducer label.
Displays the current transducer reading.
Exit data editing.
Move between Setup Screens, fields on a screen, or to increment/decrement the digits when editing number fields.
Figure 32 Select Pressure Transducer
Figure 33 Select Pump, to Enable Closed Loop Pressure Control
Figure 34 Enter Calibration Scale Factor
Figure 35 Enter Calibration Offset Value
24 | 3A2527D |