Graco 24P822 Install Optional Accessory Kits, Pressure Transducer Kit

Page 4

Installation

Install Optional Accessory Kits

Optional accessory kits are available for purchase separately, including a pressure transducer kit (PN 24R050), a start/stop switch kit (PN 16U729), and a controller kit (24V001 ) for a back pressure regulator.

Pressure Transducer Kit

1.To measure fluid pressure, install the pressure transducer in the fluid line with a tee fitting.

Option

Description

 

 

Closed Loop Control

If closed loop control

Enabled

is enabled on Setup

 

Screen 8 (transducer

 

1) or Setup Screen 9

 

(transducer 2), install

 

the transducer near the

 

pump outlet, not near

 

the end of the circulation

 

line.

Closed Loop Control

Install the transducer

Not Enabled

where needed.

2.Connect the transducer cable to Port 7 (transducer 1) or Port 10 (transducer 2) on the control module.

Start/Stop Switch Kit

1.Mount the switch near the control module, using the bracket provided.

2.Connect the switch cable to Port 4 on the control module.

BPR Controller

The BPR (back pressure regulator) controller enables the user to control the back fluid pressure from the control module.

1.Mount the BPR controller using the bracket provided.

2.Connect a supply air line to the BPR controller air inlet (105).

NOTICE

To prevent equipment damage, always apply air pressure to the BPR controller before applying power to the system.

3.Connect an air line from the BPR controller air output (108) to the BPR.

4.Connect the BPR controller input cable (102) to Port 8 on the control module.

4

3A2527D

Image 4
Contents Important Safety Instructions 24P822 E-Flo DC Control Module KitContents Install the Control Module InstallationControl Module Install Optional Accessory Kits Pressure Transducer KitCable Connection Adcm Cable Connections Adcm Port Connector Purpose NumberCan Cables Cable Part Description Module Screens OperationModule Keys Membrane Keys Icons Screen IconsInitial Setup Screen Navigation and EditingInitial Setup Setup and Edit Profiles RUN Screen MapScreen Map Run Screen Run ScreensRun Screen 1 Key Run Screen 2 Key Run Screen 3 KeyRun Screens Run Screens 5-8 Screen 5 shown3A2527D Setup Screen Setup ScreensSetup Screen 1 Key Set Back Pressure Regulator Setup Screen 2 Key Setup Screen 3 Key Setup Screen 4 Key Setup Screen 4 In Pressure ModePressure Mode Examples Flow Mode ExamplesSelect Jog Mode Setup Screen 5 KeySetup Screen 6 Key Setup Screen 7 KeySetup Screens 8 Setup Screens 8 and 9 KeySetup Screens 10 Setup Screens 10 and 11 Screen 10 shownSetup Screen 12 Key Select Local or Remote ControlSetup Screen 13 Key Select Desired Pressure UnitsSetup Screen 14 Key MM/DD/YY DD/MM/YY YY/MM/DDSetup Screen 15 Key Set the PasswordDisplay Applicable Blink Alarm or Description Error Code TroubleshootingCode WMC 24P822 Control Module Kit PartsPart Description Accessory Kits BPR Controller Kit Start/Stop Switch Kit 16U729Pressure Transducer Kit 24R050 Part Description QtyAppendix a Modbus Variable Map Modbus Variable Register Size AccessModbus Registers Alarm Bits Pump Alarms Word Event Type Event Code Event Name Display Alarms Word Bit Event Type Event Code Event Name Display Alarms WordPump Status and Control Bits Units Unit Type Units RegisterRegister value for Unit valuesAppendix B. Pump Control from a PLC 3A2527D Graco Standard Warranty Graco Information

24P822 specifications

The Graco 24P822 is a highly versatile airless paint sprayer designed for both DIY enthusiasts and professional contractors. Known for its durability and efficiency, this sprayer enables users to apply paint, stain, and sealants smoothly and evenly, providing high-quality finishes on various surfaces. Its intuitive design and advanced features make it a popular choice in the realm of airless painting technology.

One of the standout features of the Graco 24P822 is its powerful electric motor, which delivers a consistent paint flow for optimal coverage. This sprayer can handle a wide range of coatings, including thicker paints and stains, making it ideal for diverse projects such as fences, walls, decks, and more. The motor is designed to provide reliability and performance, allowing users to complete jobs efficiently without the frustration of clogging.

The Graco 24P822 is equipped with a ProXChange Pump, a revolutionary technology that allows for quick and easy pump replacement without any tools. This feature minimizes downtime and keeps the sprayer operational, making it especially useful for contractors who need to meet tight deadlines. The pump is also designed for durability, with a robust design that can withstand the rigors of repeated use.

Another notable characteristic of the Graco 24P822 is its adjustable pressure control. This feature allows users to customize the pressure settings based on the specific project requirements. Whether users need a higher pressure for thin coatings or a more delicate setting for intricate work, this flexibility ensures optimal results every time.

The sprayer also includes a flexible suction tube, which allows for easy paint retrieval from 1-gallon or 5-gallon paint containers. This design helps to prevent spills and makes it simpler to switch between colors or types of paint without hassle.

In terms of portability, the Graco 24P822 is designed with a lightweight structure and a compact build, making it easy to transport between job sites. The integrated carry handle enhances mobility, while the built-in storage compartments provide a convenient place to keep essential tools and accessories.

In summary, the Graco 24P822 airless paint sprayer combines power, efficiency, and ease of use with advanced technologies that cater to both professional painters and DIY homeowners. Its durability, customizable pressure settings, and quick pump replacement options underscore its reputation as a reliable and effective painting tool. Whether you're tackling a small home improvement project or a larger renovation, the Graco 24P822 is an excellent choice that delivers quality results.