Graco 24P822 important safety instructions Installation, Install the Control Module

Page 3

Control Module

Control Module

The Control Module provides the interface for users to enter selections and view information related to setup and operation.

The screen backlight is factory set to remain on, even without screen activity. See Setup Screen 4 to set the backlight timer to your preference. Press any key to restore.

Keys are used to input numerical data, enter setup screens, navigate within a screen, scroll through screens, and select setup values.

Installation

Install the Control Module

1.Shut off and lock out power to the motor.

2.Install the jumper connector (5) over the top two terminals of the motor, using the screw (5a).

NOTE: To connect up to 8 motors together, see Appendix A in the E-Flo DC Motor Manual, where the control module is the referenced intrinsically safe (IS) apparatus.

3.Assemble the bracket kit (6a-6f) and the holder and tie (11, 12) as shown.

Figure 1 Install the Control Module

4.Install the module (1) in the bracket (6a), making sure the tabs at the bottom of the bracket engage the slots in the module, and the lip at the top of the bracket holds the module securely in place.

5.Connect the accessory cable (C), using the tie (12) as a strain relief as shown. See Cable Connection, page 5 .

6.Restore power to the motor.

3A2527D

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents 24P822 E-Flo DC Control Module Kit Important Safety InstructionsContents Installation Install the Control ModuleControl Module Pressure Transducer Kit Install Optional Accessory KitsAdcm Cable Connections Adcm Port Connector Purpose Number Cable ConnectionCan Cables Cable Part Description Operation Module ScreensModule Keys Membrane Keys Screen Icons IconsScreen Navigation and Editing Initial SetupScreen Map Initial Setup Setup and Edit Profiles RUNScreen Map Run Screens Run ScreenRun Screen 1 Key Run Screen 3 Key Run Screen 2 KeyRun Screens 5-8 Screen 5 shown Run Screens3A2527D Setup Screens Setup ScreenSetup Screen 1 Key Set Back Pressure Regulator Setup Screen 2 Key Setup Screen 3 Key Setup Screen 4 In Pressure Mode Setup Screen 4 KeyFlow Mode Examples Pressure Mode ExamplesSetup Screen 5 Key Select Jog ModeSetup Screen 7 Key Setup Screen 6 KeySetup Screens 8 and 9 Key Setup Screens 8Setup Screens 10 and 11 Screen 10 shown Setup Screens 10Select Local or Remote Control Setup Screen 12 KeySelect Desired Pressure Units Setup Screen 13 KeyMM/DD/YY DD/MM/YY YY/MM/DD Setup Screen 14 KeySet the Password Setup Screen 15 KeyError Code Troubleshooting Display Applicable Blink Alarm or DescriptionCode WMC Parts 24P822 Control Module KitPart Description Part Description Qty Accessory Kits BPR Controller KitStart/Stop Switch Kit 16U729 Pressure Transducer Kit 24R050Modbus Variable Register Size Access Appendix a Modbus Variable MapModbus Registers Alarm Bits Pump Alarms Word Event Type Event Code Event Name Display Alarms Word Display Alarms Word Bit Event Type Event Code Event NamePump Status and Control Bits Unit values Units Unit TypeUnits Register Register value forAppendix B. Pump Control from a PLC 3A2527D Graco Information Graco Standard Warranty

24P822 specifications

The Graco 24P822 is a highly versatile airless paint sprayer designed for both DIY enthusiasts and professional contractors. Known for its durability and efficiency, this sprayer enables users to apply paint, stain, and sealants smoothly and evenly, providing high-quality finishes on various surfaces. Its intuitive design and advanced features make it a popular choice in the realm of airless painting technology.

One of the standout features of the Graco 24P822 is its powerful electric motor, which delivers a consistent paint flow for optimal coverage. This sprayer can handle a wide range of coatings, including thicker paints and stains, making it ideal for diverse projects such as fences, walls, decks, and more. The motor is designed to provide reliability and performance, allowing users to complete jobs efficiently without the frustration of clogging.

The Graco 24P822 is equipped with a ProXChange Pump, a revolutionary technology that allows for quick and easy pump replacement without any tools. This feature minimizes downtime and keeps the sprayer operational, making it especially useful for contractors who need to meet tight deadlines. The pump is also designed for durability, with a robust design that can withstand the rigors of repeated use.

Another notable characteristic of the Graco 24P822 is its adjustable pressure control. This feature allows users to customize the pressure settings based on the specific project requirements. Whether users need a higher pressure for thin coatings or a more delicate setting for intricate work, this flexibility ensures optimal results every time.

The sprayer also includes a flexible suction tube, which allows for easy paint retrieval from 1-gallon or 5-gallon paint containers. This design helps to prevent spills and makes it simpler to switch between colors or types of paint without hassle.

In terms of portability, the Graco 24P822 is designed with a lightweight structure and a compact build, making it easy to transport between job sites. The integrated carry handle enhances mobility, while the built-in storage compartments provide a convenient place to keep essential tools and accessories.

In summary, the Graco 24P822 airless paint sprayer combines power, efficiency, and ease of use with advanced technologies that cater to both professional painters and DIY homeowners. Its durability, customizable pressure settings, and quick pump replacement options underscore its reputation as a reliable and effective painting tool. Whether you're tackling a small home improvement project or a larger renovation, the Graco 24P822 is an excellent choice that delivers quality results.
Top Page Image Contents