Siemens Airfield Solutions Manual for F-Range Style 2 Inset Lights Installation

Page 15

L-850D/E F-Range Style 2 Inset Lights

Installation on FAA Deep Bases

Overview of FAA deep bases and Siemens Airfield Solutions adapter rings

Introduction	The next table lists the FAA deep bases which can be used for the installation of an
	12” F-range inset light and the Siemens Airfield Solutions adapter ring to use.

Toe-in	For applications where a toe-in is required, two solutions are possible:
	1.	light fittings with built-in toe-in; the adapter ring must be in the straight version.
	2.	light fittings without toe-in ; the adapter ring must include the required toe-in.

The toe-in is used in the following applications:

	Toe-in	Application

	2°	Approach side row and threshold wing bar

	3.5°	Threshold

Table

FAA Deep Base	Adapter Ring	Adapter Ring	Screw
	description	Code No	type
	description	Code No

E-1315 LB-1/ LB4A	12” to 16” straight	1411.19.170	Metric
(diam 16”)	12” to 16” toe-in right 3.5°	1411.19.190	Metric
	12” to 16” toe-in left 3.5°	1411.19.180	Metric
	12” to 16” toe-in right 2°	1411.19.770	Metric
	12” to 16” toe-in left 2°	1411.19.760	Metric
	12” to 16” straight (12 holes at 30°)	1411.19.160	UNC
	12” to 16” straight (6 holes at 60°)	1411.19.100	UNC

E-1315 LB-4	12” to 16” straight	1411.19.070	UNC
(diam 16”)	12” to 16” toe-in right 3.5°	1411.19.110	UNC
	12” to 16” toe-in left 3.5°	1411.19.120	UNC
	12” to 16” straight	1411.19.130	Metric
	12” to 16” toe-in right 3.5°	1411.19.150	Metric
	12” to 16” toe-in left 3.5°	1411.19.140	Metric

* Only for fittings using 3 x 105 W lamps.

Deep Base	Contact the Siemens Airfield Solutions Sales Department.
references

 2002 Siemens Airfield Solutions, Incorporated	96A0266D	13
All rights reserved	Issued 2/02

Image 15

Contents Siemens Airfield Solutions 850D/E F-Range Style Inset Lights Revision Description Editor Checked Date Record of ChangesSafety precautions Safety InstructionsWarranty Parts Identification Comments and Proposals Information About this ManualTable of Contents General Information and Requirements Overview General information Equipment data Equipment required for installation and maintenance Label Toe-in InstallationInstallation Overview Organisation Applicable documents General recommendationsAdditional tools and equipment Equipment required for installationTool case Attack driverInstallation on FAA Deep Bases Overview UNC Step Action Installation methodMounting and connection How to mount the light assemblyMaintenance Overview Workshop maintenance and preventive maintenance Field maintenancePreventive maintenance Preventive Maintenance Tasks Interval Check ActionLifting tools ProcedurePreliminary Servicing in the Maintenance Base OverviewHow to open the light assembly How to replace a lamp Film disc cut-out ProcedureIllustration Illustration below clarifies the procedure How to replace a prism How to replace the optical assembly How to replace the cable set assembly Illustration How to close and test the light fixture Problem Possible cause Solution TroubleshootingSee Introduction Light Assembly Part NumbersContents This chapter contains the following topics Topic Assemblies and Exploded View OverviewRemarks AssembliesOrdering code 850ERemark Film disc cutout optional Ordering Code 850DList of tables Cate Solutions code 850EFixtures 850D000 010 020 030 040 050 060 070 080 090 100 Description 1411.40.xxx000 010 020 030 040 050 060 070 Description 1411.41.xxxIllustrations 200 210 220 230 240 250 260 DescriptionPart number 270 280 290 300 310 320 330 270 280 290 300 310 320 330 Toe-in Installation 100 110 120 130 140 150 160 170 180 Solutions partIllustration below shows the 12 F-Range inner covers Screw Tool Loctite Torque Screws OverviewExploded view 12 L-850D/ERange