Harbor Freight Tools 95630 Safety Alert Symbol and Signal Words, Symbol Property or statement

Page 2

SAVE THIS MANUAL

Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.

Safety Alert Symbol and Signal

Words

In this manual, on the labeling, and all other information provided with this product:

This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.

DANGER indicates a hazardous situation which, if not avoided, will result

in death or serious injury.

WARNING indicates a hazardous situation

which, if not avoided, could result in death or serious injury.

CAUTION, used with the safety alert

symbol, indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.

NOTICE is used to address practices not

related to personal injury.

CAUTION, without the safety alert symbol, is

used to address practices not related to personal injury.

 

 

 

 

Symbol Definitions

 

 

Symbol

Property or statement

PSI

Pounds per square inch of pressure

 

 

CFM

Cubic Feet per Minute flow

 

 

SCFM

Cubic Feet per Minute flow at standard

conditions

NPT

National pipe thread, tapered

 

 

NPS

National pipe thread, straight

 

 

 

WARNING marking concerning Risk of

 

Eye Injury. Wear ANSI-approved safety

 

goggles with side shields.

 

Read the manual before set-up and/or

 

use.

 

 

 

WARNING marking concerning Risk of

 

Hearing Loss. Wear hearing protection.

 

 

 

WARNING marking concerning Risk

 

of Respiratory Injury. Wear NIOSH-

 

approved dust mask/respirator.

 

WARNING marking concerning Risk of

 

Explosion.

 

 

 

ImportantIMPOINSTRUCTIONSSafety Instructions

INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK, OR INJURY

TO PERSONS

WARNING – When using tools, basic precautions should always be followed, including the following:

Page 2

For technical questions, please call 1-800-444-3353.

SKU 95630

Image 2
Contents Compressor AIR Brush KIT For technical questions, please call Safety Alert Symbol and Signal WordsSymbol Property or statement General Electrical SafetyPersonal safety Work areaService Tool use and careSpecificSPECIFICSafety InstructionsSAFETY S Prong Plug and Outlet Grounded Tools Tools with Three Prong PlugsDing Grounding Double Insulated Tools Tools with Two Prong Plugs Extension CordsFunctional Description SymbologyUnpacking Initial Tool Setup/Assembly AssemblyWork Piece and Work Area Set Up General Operating InstructionsTo Prevent Serious Injury SKU For technical questions, please call TroubleshootingProblem Possible Causes Likely Solutions Qty Part Description Compressor Parts List and Assembly DiagramPart Description Qty For technical questions, please callAir Brush Parts List and Assembly Diagram Part Description QtyLimited 1 Year Warranty