Harbor Freight Tools 95630 manual

SpecificSPECIFICSafety InstructionsSAFETY S

1.Maintain labels and nameplates on the tool. These carry important information. If unreadable or missing, contact Harbor Freight Tools for a replacement.

2.DANGER! This Air Compressor is NOT equipped and should not be used “as is” to supply breathing quality air. For any application of air for human consumption, you must fit the Air

Compressor with suitable in-line safety and alarm equipment (not included). This additional equipment is necessary to properly filter and purify the air to meet minimal specifications for Grade D breathing as described in Compressed Gas Association Commodity

Specification G 7.1-1966, OSHA 29 CFR

1910. 134, and/or Canadian Standards Associations (CSA).

3.Make sure all tools and equipment used with the Air Compressor are rated to the appropriate capacity.

Do not use any tool or equipment that operates above 58 PSI.

4.Drain the Air Compressor everyday. Do not allow excessive moisture to build up inside the Air Compressor. Do not open the Water Drain Valve (23) with more than 10 PSI of air pressure in the Compressor.

5.Avoid injury. Do not direct compressed air at people of animals. Do not direct airflow at eyes or ears.

6.Make sure the Air Compressor is located on a flat, level, sturdy surface capable of supporting the weight of the Compressor and any additional tools and equipment.

7.Industrial applications must follow OSHA guidelines.

8.Do not stand or sit on the Air Compressor. Serious injury could result if the Compressor is tipped.

9.Do not leave the Air Compressor unattended when it is plugged in. Turn off the Compressor and unplug before leaving.

10.Do not move or transport the Air Compressor if the unit is under pressure.

11.Do not force the Air Compressor.

This tool will do the work better and safer at the speed and capacity for which it was designed.

12.This Air Compressor will automatically shut off on overload or under excessive heat. Should this occur, turn the Power Switch (34) to its “OFF” position. Wait until the Air Compressor cools. Then turn the Power Switch (34) to its “ON” position to resume work.

13.Spray painting only. Do not use this Air Compressor with gasoline, kerosene, or any other flammable solvent.

14.Maintain a safe working environment. Make sure there is adequate surrounding workspace. Do not use this product in a damp or wet location.

15.People with pacemakers should consult their physician(s) before using this product. Electromagnetic fields in close proximity to a heart pacemaker could cause interference to or failure of the pacemaker. In addition, people with pacemakers should adhere to the following:

•Avoid operating power tools alone.

•Don’t use a power tool with the power switch locked on.

•If powered via a power cord be certain that the tool is properly grounded. A

SKU 95630

For technical questions, please call 1-800-444-3353.

Page 5