Symbology
| Double Insulated |
|
|
| Canadian Standards Association |
|
|
| Underwriters Laboratories, Inc. |
|
|
V~ | Volts Alternating Current |
A | Amperes |
| |
|
|
n0 xxxx/min. | No Load Revolutions per Minute |
(RPM) | |
| WARNING marking |
| concerning Risk of Eye Injury. |
| Wear ANSI‑approved safety |
| goggles with side shields. |
| Read the manual before |
| and/or use. |
|
|
| WARNING marking concerning |
| Risk of Hearing Loss. |
| Wear hearing protection. |
| WARNING marking concerning |
| Risk of Fire. |
| Do not cover ventilation ducts. |
| Keep flammable objects away. |
| WARNING marking concerning |
| Risk of Electric Shock. |
| Properly connect power cord to |
| appropriate outlet. |
Description
Functional Description
Compressor Specifications | ||
|
| |
Type | Single cylinder, oiless piston | |
Power | 1/5 HP | |
Voltage | 120, 60HZ, 1.18 AMP | |
Auto shutoff | ||
shutoff protection | ||
| ||
Air output | 0 - 58 PSI | |
Air outlet size | 1/8 - 27 NPT male threads | |
Motor RPM | 1750 | |
Pressure Gauge | ||
Cord length | ||
Air Brush Specifications | ||
|
| |
Working Air | 0.5 CFM @ 20 PSI | |
Pressure | ||
| ||
Air Hose length | Approx. 5FT | |
Housing | Anodized Aluminum | |
| 22cc Glass jar assembly | |
Accessories | 5cc Metal cup | |
| Metal Hanger | |
INITIAL ASSEMBLY
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product.
Note: For additional information regarding
parts listed in following pages, refer to Assembly Diagrams near end of manual.
Unpacking
When unpacking, make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at 1‑800‑444‑3353 as soon as possible.
Page 8 | For technical questions, please call | SKU 95630 |