Harbor Freight Tools 67708 operating instructions Assembly/Mounting, Sample Air Line Setup

Page 9

 

Assembly/Mounting

 

 

Bolt (64)

 

 

Wheel (63)

Hex

Bolts (71)

Tank (70)

Nuts

 

 

 

 

(65)

Handle (72)

Wheel (63)

Bolts (71)

 

 

Bolt (64)

Figure 2

1.Attach the Wheels to the Tank, using the Bolts and Hex Nuts.

2.Slide the Handle into the two slots on the top of the Tank and secure in place with four Bolts.

Cylinder Head (7)

female Quick Coupler and fully open all regulators and valves.

b. Plug in the Power Cord.

c. Turn the Power Switch ON.

d. Let the unit run for 30 minutes. Air will expel freely through the Coupler.

e. Turn the Power Switch OFF.

f.Unplug the Power Cord and remove the male coupler.

5.Connect a regulator valve, an inline shut off valve and a 1/4” NPT air hose to the Quick Coupler (all sold separately). The air hose must be long enough to reach the work area with enough extra length to allow free movement while working.

Note: An in-line shutoff ball valve is an important safety device because it controls the air supply even if the air hose is ruptured. The shutoff valve should be a ball valve because it can be closed quickly.

Air Filter

(6)

Figure 3

3.Thread the Air Filter onto the side of the Cylinder Head.

4.Break in the new Air Compressor as follows:

a.Make sure the Power Switch is OFF and the unit is unplugged. Insert a male coupler (sold separately) into the

 

Coupler

Coupler

 

Plug

Plug

Tool

 

 

 

Quick

Air Hose

 

Coupler

 

 

on Reel

Shut

 

 

Off

Oiler

Filter

Valve

 

 

 

 

Air

 

 

Compressor

Regulator with

Pressure Gauge

Sample Air Line Setup

6.Depending on the tool which you will be using with this compressor, you may need to incorporate additional components, such as an in-line oiler, a filter, or a dryer (all sold separately).

SKU 67708

For technical questions, please call 1-800-444-3353.

Page 9

Image 9
Contents 2 HP 10 Gallon PSI Air compressor For technical questions or replacement parts, please callContents General Compressor Safety Save This ManualDo not abuse the cord. Never use the cord for unplugging Air Compressor Safety Warnings Personal safetyService 25’ 50’ 100’ 150’ LengthGrounding 125 V~ 3-Prong Plug and Outlet PSIUnpacking SpecificationsInstructions for putting Into use FunctionsSample Air Line Setup Assembly/MountingCold Weather Operation Checking the OilGeneral Operating Instructions Compressor Area Set UpGeneral Operation SKU For technical questions, please callAutomatic Shut off System Emergency DepressurizationMaintenance Servicing Cleaning, Maintenance, LubricationMaintenance Schedule Air Filter Maintenance Oil MaintenanceDraining Moisture from the Tank To drain the oil from the Pump CrankcaseProblem Possible Causes Likely Solutions TroubleshootingOverheating Record Product’s Serial Number Here Please Read the Following CarefullyParts List Part DescriptionQty Part Description Assembly Diagram Limited 1 year / 90 day Warranty