Harbor Freight Tools 45804 manual Product Specifications, Save this Manual, General Safety Rules

PRODUCT SPECIFICATIONS

ITEM	DESCRIPTION
Electrical Requirements	2 HP Motor /12 Volt /60 Hz
	13 Amps /3,600 RPM
Blade Size Capacity	10” Diameter / 5/8” Arbor (blade not included)
Overall Dimensions	22-3/4” W x 26” L x 15-1/2” H
Table Dimensions	26” W x 17-1/2” L
Adjustable Rip Fence Size	17-3/4” W x 1-7/8” L
Scale Measurement Increments	Inches / Metric
Maximum Rip With Fence	9-1/2”
Blade Adjustments	90 Degrees to 45 Degrees
Cutting Capacity	2-7/8” at 90 Degrees
	2-5/16” at 45 Degrees
Weight	32.85 Lbs.

Accessories Included: Fence Assembly, Blade Guard, Bottom Plate, Mitre Guide, Push Stick, Elevation Wheel Handle, 3 Hex Wrenches (4mm, 5mm, 6mm), 2 Spanner Wrenches

* NOTE:
Recommended Blade (not included):	E194601
Item #529 - 10” M2 Molybdenum Tipped (40 Tooth) saw blade.

SAVE THIS MANUAL

You will need this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures, parts list and assembly diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Keep this manual and invoice in a safe and dry place for future reference.

GENERAL SAFETY RULES

WARNING!

READ AND UNDERSTAND ALL INSTRUCTIONS

Failure to follow all instructions listed below may result in

electric shock, fire, and/or serious injury.

SAVE THESE INSTRUCTIONS

WORK AREA

1.Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents.

SKU 45804 PAGE

REV 07j