Harbor Freight Tools 45804 manual Grounding, Service, Grounded Tools Tools with Three Prong Plugs

Page 5

22.Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the tool’s operation. If damaged, have the tool serviced before using. Many accidents are caused by poorly maintained tools.

23.Use only accessories that are recommended by the manufacturer for your model. Accessories that may be suitable for one tool may become hazardous when used on another tool.

SERVICE

24.Tool service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified personnel could result in a risk of injury.

25.When servicing a tool, use only identical replacement parts. Follow instructions in the “Inspection, Maintenance, And Cleaning” section of this manual. Use of unauthorized parts or failure to follow maintenance instructions may create a risk of electric shock or injury.

GROUNDING

WARNING!

Improperly connecting the grounding wire can result in the risk of electric shock. Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. Do not modify the power cord plug provided with the tool. Never remove the grounding prong from the plug. Do not use the tool if the power cord or plug is damaged. If damaged, have it repaired by a service facility before use. If the plug will not fit the outlet, have a proper outlet installed by a qualified electrician.

GROUNDED TOOLS: TOOLS WITH THREE PRONG PLUGS

1.Tools marked with “Grounding Required” have a three wire cord and three prong grounding plug. The plug must be connected to a properly grounded outlet. If the tool should electrically malfunction or break down, grounding provides a low resistance path to carry electricity away from the user, reducing the risk of electric shock. (See Figure A, next page.)

2.The grounding prong in the plug is connected through the green wire inside the cord to the grounding system in the tool. The green wire in the cord must be the only wire connected to the tool’s grounding system and must never be attached to an electrically “live” terminal. (See Figure A.)

SKU 45804

PAGE

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Bench Table SAW 2 HP Assembly and Operating InformationGeneral Safety Rules Product SpecificationsSave this Manual Work AreaPersonal Safety Electrical SafetyTool USE and Care Grounded Tools Tools with Three Prong Plugs ServiceGrounding Figure a Double Insulated Tools Tools with TWO Prong Plugs See Figure C, and Figure D Extension CordsSee Figure C Specific Safety Rules SymbologyNever allow the woodstock to to it Always use the proper size and type of Saw Blade UnpackingTo Attach The Bottom Plate Assembly InstructionsTo Install a Saw Blade See Figure F To Attach The Guard AssemblySee Figure E, previous Mounting PostTension Adjustment Screw To Attach The Fence AssemblyOperating Instructions To Adjust The Angle Of The Saw BladeTo Raise And Lower The Saw Blade See Figure MAssembly 75 to the right or left. See Figure M To Adjust The Width Of a CutProper Placement Of Hands During The Cutting Process See Figure O, nextTable SAW Overload Protection INSPECTION, MAINTENANCE, and CleaningTOP View of Table Manner. See Figure PPlease Read the Following Carefully Parts List a Parts Parts List B Parts Assembly Diagram a Parts Assembly Diagram B Parts Appendix a Mounting Instructions Mission Oaks Blvd. PO Box 6009 Camarillo, CA 93011 800 Limited 1 year / 90 Day warranty
Top Page Image Contents