Harbor Freight Tools 92386 manual Assembly Instructions

Page 11

37.WARNING! Some dust created by power sanding, sawing, grinding, drilling, and other construction activities, contain chemicals known (to the State of California) to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and ce- ment and other masonry products, arsenic and chromium from chemically treated lumber. Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in well ventilated areas, and work with approved safety equipment such as those dust masks that are specially designed to filter out microscopic particles.

(California Health & Safety Code § 25249.5, et seq.)

38.WARNING! People with pacemakers should consult their physician(s) before using this product. Operation of electrical equipment in close proximity to a heart pace- maker could cause interference or failure of the pacemaker.

39.WARNING! The warnings and cautions discussed in this manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator.

SAVE THESE INSTRUCTIONS

ASSEMBLY INSTRUCTIONS

NOTE: For additional information regarding the parts listed in the following pages, refer to the Assembly Diagram on page 25.

1.WARNING! Always make sure the Power Switch of the Tile Saw is in its “OFF” position and the unit is unplugged from its electrical outlet prior to assembling the unit, adding any accessories, or making any adjustments to the unit.

2.Unpack the Tile Saw, and with assistance, carefully lay the tool on its side on a flat, level floor surface. (See Figure D, next page.)

REV 12/06

SKU 92386

For technical questions, please call 1-800-444-3353.

Page 11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents HP Tile SAW For technical questions or replacement parts, please callUnpacking Product SpecificationsGeneral Safety Rules Save this ManualWork Area Electrical SafetyPersonal Safety Tool USE and Care Grounding ServiceSee Figure B See Figure B, nextAt full load Nameplate Extension Cord Length120 or 240 Volt Specific Safety Rules Figure C Never attempt to cut more than one tile at a time Industrial applications must follow Osha requirementsAssembly Instructions TOP View See Figure FWheel Assembly See Figure I, next Operating InstructionsSee Figure H See Figure J To Make a Straight CutFigure K See Figure K, page 16 and Figure L, See Figure K,See Figure P, next SKU For technical questions, please call To Change The Saw BladeSee Figures P and Q Figure PFigure R INSPECTION, MAINTENANCE, and Cleaning Please Read the Following Carefully Part Description Parts ListFoot Pad Assembly Diagram
Top Page Image Contents