Harbor Freight Tools 92386 manual Nameplate Extension Cord Length, 120 or 240 Volt, At full load

Page 7

RECOMMENDED MINIMUM WIRE GAUGE FOR EXTENSION CORDS*

(120 or 240 VOLT)

NAMEPLATE

 

 

 

 

EXTENSION CORD LENGTH

 

AMPERES

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(at full load)

25 Feet

 

50 Feet

 

75 Feet

 

100 Feet

150 Feet

0 – 2.0

18

 

18

 

18

 

18

16

2.1

– 3.4

18

 

18

 

18

 

16

14

3.5

– 5.0

18

 

18

 

16

 

14

12

5.1

– 7.0

18

 

16

 

14

 

12

12

7.1 – 12.0

18

 

14

 

12

 

10

-

12.1

– 16.0

14

 

12

 

10

 

-

 

-

16.1

– 20.0

12

 

10

 

-

 

-

 

-

FIGURE B

* Based on limiting the line voltage drop to five volts at 150% of the rated amperes.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Symbology

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Double Insulated

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Canadian Standards Association

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Underwriters Laboratories, Inc.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

V~

Volts Alternating Current

 

 

 

 

 

 

 

A

Amperes

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

n0 xxxx/min.

No Load Revolutions per Minute (RPM)

 

 

SKU 92386

For technical questions, please call 1-800-444-3353.

Page

Image 7
Contents HP Tile SAW For technical questions or replacement parts, please callUnpacking Product SpecificationsGeneral Safety Rules Save this ManualPersonal Safety Electrical SafetyWork Area Tool USE and Care Grounding ServiceSee Figure B See Figure B, next120 or 240 Volt Nameplate Extension Cord LengthAt full load Specific Safety Rules Figure C Never attempt to cut more than one tile at a time Industrial applications must follow Osha requirementsAssembly Instructions TOP View See Figure FWheel Assembly See Figure H Operating InstructionsSee Figure I, next See Figure J To Make a Straight CutFigure K See Figure K, page 16 and Figure L, See Figure K,See Figure P, next SKU For technical questions, please call To Change The Saw BladeSee Figures P and Q Figure PFigure R INSPECTION, MAINTENANCE, and Cleaning Please Read the Following Carefully Part Description Parts ListFoot Pad Assembly Diagram