Harbor Freight Tools 92386 manual Product Specifications, Save this Manual, Unpacking

Page 2

 

 

PRODUCT SPECIFICATIONS

 

 

 

 

 

E105017

 

 

 

Electrical Requirements

 

120 V / 60 Hz / 3550 RPM / 1.5 HP/ Single Phase

 

 

 

3-Prong Power Cord Plug / Power Cord Length: 9 Ft

Coolant Pump Type

 

Submersible Fountain Pump w/Flow Adjustment / 246 GPH Capacity

Required Blade Size / Style

 

7” Diameter / Continuous Rim Diamond Blade / Minimum 3550 RPM

Maximum Cutting Depth

 

1” @ 90° / 1” @ 45°

Maximum Cutting Length

 

25-3/8”

Maximum Tile Size

 

24” x 24”

Saw Bevel Capacity

 

0° to 45° in 2.5° Increments – Left Tilt Only

Miter Gauge Capacity

 

0° to 45° in 1° Increments – Right Angles Only

Rip Fence Scale

 

0” to 8-1/4” in 1/8” Increments / 0mm to 21mm in 2mm Increments

Spindle Size

 

5/8”

Fence Type

 

Fixed

Coolant Basin Capacity

 

4 Gallons

Basin Dimensions

 

15” W x 22-3/4” L x 3-1/8” H

Work Table Dimensions

 

18” W x 32-3/4” L

Overall Dimensions

 

18-1/4” W x 42-1/4” L x 47-1/2” H

Weight

 

89 Pounds

Accessories

 

Arbor Nut Wrenches (Qty. 2) / 7” Diameter Saw Blade (Qty. 1)

SAVE THIS MANUAL

You will need this manual for the safety warnings and precautions, assembly, operat- ing, inspection, maintenance and cleaning procedures, parts list and assembly diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Keep this manual and invoice in a safe and dry place for future reference.

UNPACKING

When unpacking, check to make sure all the parts shown on the Parts Lists on page 23 are included. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible.

GENERAL SAFETY RULES

IMPORTANT SAFETY INSTRUCTIONS

WARNING!

READ AND UNDERSTAND ALL INSTRUCTIONS

Failure to follow all instructions listed below may result in

electric shock, fire, and/or serious injury.

SAVE THESE INSTRUCTIONS

REV 08/05; REV 12/06

SKU 92386

For technical questions, please call 1-800-444-3353.

Page

Image 2
Contents For technical questions or replacement parts, please call HP Tile SAWSave this Manual Product SpecificationsGeneral Safety Rules UnpackingWork Area Electrical SafetyPersonal Safety Tool USE and Care Service GroundingSee Figure B, next See Figure BAt full load Nameplate Extension Cord Length120 or 240 Volt Specific Safety Rules Figure C Industrial applications must follow Osha requirements Never attempt to cut more than one tile at a timeAssembly Instructions See Figure F TOP ViewWheel Assembly See Figure I, next Operating InstructionsSee Figure H To Make a Straight Cut See Figure JFigure K See Figure K, See Figure K, page 16 and Figure L,To Change The Saw Blade See Figure P, next SKU For technical questions, please callFigure P See Figures P and QFigure R INSPECTION, MAINTENANCE, and Cleaning Please Read the Following Carefully Parts List Part DescriptionFoot Pad Assembly Diagram