FIGURE G
WORKPIECE
(NOT INCLUDED)
THUMB SCREW |
|
(38) |
|
STOCK | STOP BLOCK |
STOP ROD | |
(40) | (41) |
TO CONVERT THE BANDSAW FOR VERTICAL USE
1.NOTE: Notching, slitting, and contour work is best done with the Bandsaw in its vertical position.
2.Raise the Saw Head to its full vertical position, making sure it locks into position by turning the Cylinder’s (216) on/off valve to its “OFF” position (the spoke to be positioned cross the cylinder). (See Figure H.)
FIGURE H
CYLINDER (216)
SKU 97009 | For technical questions, please call | Page 15 |