Harbor Freight Tools 97099 operating instructions Troubleshooting

Page 29

TROUBLESHOOTING

Adjust the speed and/or feed for the material being cut.

					3.
3.
3.
4.					4.
5.					5.
6.					6.

SKU 97009

For technical questions, please call 1-800-444-3353.

Page 29

Image 29

Contents Distributed exclusively by Harbor Freight Tools For technical questions or replacement parts, please callFor technical questions, please call Save This Manual Personal safety Work area safetyElectrical safety SKU For technical questions, please call Power tool use and care. Service Specific Safety Rules For technical questions, please call See 3-Prong Plug and Outlet Improperly connecting the grounding wire can resultElectric shock See Table a See Outlets for 2-Prong PlugFeet SpecificationsUnpacking See Figure B To USE the Quick Vise. Setting up the Quick Vise an angle Setting up the Quick Vise for a straight 0 cut. Setting up the Quick Vise for cutting a 12 workpiece To Adjust the Stop BlockFigure G To Convert the Bandsaw for Vertical USESee Figure J To Adjust the Blade SpeedSee Figure Figure L To Adjust the Blade Guide BearingsSee Figure O, next To Adjust the Blade TrackingSee Figure N To Adjust the Feed Rate To Adjust the Blade TensionTo Fill the Coolant Tank To Adjust the Blade Guide BracketsFigure R Basic Bandsaw Operation Vertical PositionFigure S See Figure S Basic Bandsaw Operation Horizontal PositionFigure T INSPECTION, MAINTENANCE, and Cleaning Figure U See Figure UFigure W Please Read the Following Carefully Troubleshooting Parts List Part Description Specification Qty Leveler Parts List Part Description Specifications 259 Belt Tension Limiter Bolt Parts List Assembly Diagram Assembly Diagram Assembly Diagram Assembly Diagram Assembly Diagram Volt Electrical SchematicElectrical Schematic Electrical Schematic Limited 90 DAY Warranty