Harbor Freight Tools 97099 operating instructions Save This Manual

Page 3

Save This Manual

Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.

Important SAFETY Information

In this manual, on the labeling, and all other information provided with this product:

This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.

Danger

WARNING

Caution

Notice

Caution

DANGER indicates a hazardous situation which, if not avoided, will result in death or serious injury.

WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury.

CAUTION, used with the safety alert symbol, indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.

NOTICE is used to address practices not related to personal injury.

CAUTION, without the safety alert symbol, is used to address practices not related to personal injury.

SKU 97009

For technical questions, please call 1-800-444-3353.

Page

Image 3
Contents Distributed exclusively by Harbor Freight Tools For technical questions or replacement parts, please callFor technical questions, please call Save This Manual Work area safety Electrical safetyPersonal safety Power tool use and care . ServiceSKU For technical questions, please call Specific Safety Rules For technical questions, please call Improperly connecting the grounding wire can result Electric shockSee 3-Prong Plug and Outlet See Table a See Outlets for 2-Prong PlugFeet SpecificationsUnpacking See Figure B To USE the Quick Vise. Setting up the Quick Vise an angle Setting up the Quick Vise for a straight 0 cut. Setting up the Quick Vise for cutting a 12 workpiece To Adjust the Stop BlockFigure G To Convert the Bandsaw for Vertical USETo Adjust the Blade Speed See FigureSee Figure J Figure L To Adjust the Blade Guide BearingsTo Adjust the Blade Tracking See Figure NSee Figure O, next To Adjust the Feed Rate To Adjust the Blade TensionTo Fill the Coolant Tank To Adjust the Blade Guide BracketsFigure R Basic Bandsaw Operation Vertical PositionFigure S See Figure S Basic Bandsaw Operation Horizontal PositionFigure T INSPECTION, MAINTENANCE, and Cleaning Figure U See Figure UFigure W Please Read the Following Carefully Troubleshooting Parts List Part Description Specification Qty Leveler Parts List Part Description Specifications 259 Belt Tension Limiter Bolt Parts List Assembly Diagram Assembly Diagram Assembly Diagram Assembly Diagram Assembly Diagram Volt Electrical SchematicElectrical Schematic Electrical Schematic Limited 90 DAY Warranty