Harbor Freight Tools 97099 operating instructions Figure W

•Remove the old oil from inside the Gear Box Assembly (201S) and replace the oil using 140 weight gear oil (not included). The new oil should just come to the edge of the Gear Box (202-1). Do not overfill. (See Figure V.)

•Replace the Gear Box Gasket, Gear Box Cover, and four Hex Socket Head Screws. (See Figure V.)

HEX SOCKET HEAD SCREWS FIGURE V

GEAR BOX ASSY. (201S)

GEAR BOX COVER

&

GEAR BOX GASKET

4.To replace the coolant: Remove the Hose (78) at the top of the Coolant Tank (82). Then slide the Coolant Tank out from under the Stand (77S) of the Bandsaw. (See Figure W.)

•Fill the Coolant Tank to about 80% capacity with a clean, water-soluble coolant (not included). (See Figure W.)

•Slide the Coolant Tank (82) back under the Stand (77S) of the Bandsaw. Then re-insert the Hose (78) through the top of the Coolant Tank. (See Figure W.)

•IMPORTANT: The water-soluble coolant should be replaced as often as is necessary to keep metal debris in the coolant from clogging the hoses.

FIGURE W

HOSE (78)

COOLANT TANK (82)

SKU 97009 For technical questions, please call 1-800-444-3353. Page 27