
7. At this point, another Condition and Calibrate cycle can be initiated.
Troubleshooting
If you encounter problems with your Dolphin MultiCharger, first, please go through the list of problems and solutions in this chapter.
Problem | Issue |
|
|
|
|
The Green/Charging LED does not come | Check the power connections on the Dolphin MultiCharger. |
on when I insert a battery pack into the | Ensure that the POWER switch is ON and the battery pack is properly |
Dolphin MultiCharger | seated. |
|
|
The Red/Error LED comes on during | Attempt to charge the battery in another pocket location. If the Red/Error |
charging. | LED follows the battery, then the problem is associated with the battery |
| pack. If the Red/Error LED stays with the pocket then the problem is |
| associated with the charging circuitry. |
|
|
The Red/Error LED remains on, without a | An error occurred during the self diagnostic test for that particular pocket |
battery in the charging pocket. | location. Refer problem to Hand Held Products Technical Support. |
|
|
If problem persist, please contact Hand Held Products Technical Support.