Festool MFT/KAPEX instruction manual MFT/3 Setting up and assembly, Trim splinter guard

Page 5

 

2-3

 

2-2

2

 

 

2-1

3-1

3-2

3-4

 

 

3-3

 

3

MFT/3:

Setting up and assembly

Accessory attachments can be secured at different points on the multifunction table to enable different working positions.

In the standard working position, the user stands along one side of the bench [Fig. 2]. In these operating instructions, this side of the bench is referred to as the "front".

Step 1: Setting up

Take the table out of the box. Screw on the knobs [2-3] until the stop is reached. Unfold the foldaway legs and tighten the knobs on the joints to secure. Turn the end cap [2-1] on the right to adjust the length of the leg and compensate for an uneven floor surface.

NOTE: The corner feet [2-2] are fitted with rubber caps so that the bench stands securely when the legs are folded away.

Step 2: Trim splinter guard

Now you are ready to set up the guide rail system. The first thing to do is to trim the splinter guard [3-4] of the guide rail using your Festool plunge-cut saw.

Place your saw on top of the guide rail and tune it to the track on the rail using a screwdriver [3-3] to loosen or tighten the front and back set screws so that there is no play between the sole plate of the saw and he raised portion of the guide rail. However, make sure that the saw still glides smoothly on top of the guide rail.

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Manual de instrucciones Guide d’utilisationPage Technical data Table of ContentsIntended use SymbolsDesign Trim splinter guard MFT/3 Setting up and assemblySetting up Front Working side Setting up Guide rail supportAttaching the guide rail Attaching the pre-set Profile setting railCalibrating angle Adjusting the pre-set Profile setting railAdjustment parallel to the bench edge Adjusting the guide rail Relation to the workpieceAdjustment at right angles to Bench edge Adjusting the stop ruler LengthwaysAccessories, tools MaintenanceMounting the Kapex Turning the perforated topFestool Limited Warranty Warranty Conditions of 1+2 WarrantyPage Caractéristiques techniques Table des matièresLa poussière, un ris Que pour la santéEléments fournis SymbolesUtilisation conforme1-4aux Prescriptions MFT/3Etape 2 Sciage du pare-éclats Installation et montageEtape 1 Installation fixations du rail de guidage Etape 3 Mis en place desEtape 6 Réglage de la Butée angulaire Etape 5 Montage de la guide Butée angulaireAu bord de la table Décalage parallèlement par rapportDécalage perpendiculairement par Rapport au bord de la tableDécalage angulaire à laide de Léchelle graduée Etape 8 Réglage du rail de gui Dage par rapport à la pièceDécalage de la règle de butée Dans le sens longitudinal Retournement de la plaque Trouée Installation de loutil KapexAccessoires, outils Garantie limitée de Festool Garantie Conditions de la ga Rantie 1+2 ansPage Datos técnicos ContenidoRiesgos para la salud pro Ducidos por el polvoUso conforme a lo previsto SímbolosDotación de suministro Paso 2 Serrar la protección an Ti-astillas MFT/3 Instalación y montajePaso 1 Instalación Parte posterior Delante Paso 3 Fijar los soportes para El riel de guíaPaso 5 Montaje del tope angu Lar escalonado Paso 4 Fijar el riel de guíaPaso 6 Ajustar el tope angular Paso 8 Ajuste del riel de guía a La pieza de trabajo Paso 7 Ajuste del tope angular EscalonadoReverso de la placa perforada Instalación de la KapexMantenimiento Garantía limitada de Festool Accesorios, herramientasGarantía Condiciones de la Ga Rantía 1 +

MFT/3, MFT/KAPEX specifications

The Festool MFT/KAPEX and MFT/3 represent a harmonization of craftsmanship, precision, and versatility designed specifically for woodworking professionals and enthusiasts alike. These multifunctional tables are not merely work surfaces; they are engineered tools that enhance the entire woodworking experience.

The MFT/KAPEX is a portable, multi-functional work table designed to work seamlessly with the KAPEX mitre saw. One of its standout features is the integrated guide rail system, which allows for precise cuts and efficient handling of large materials. The table is equipped with a clamping system that secures workpieces, ensuring stability and accuracy during cutting operations. Another key characteristic is its foldable design, enabling easy transport and storage, making it ideal for job-site use.

In contrast, the MFT/3 serves as a highly versatile workbench that accommodates various tasks beyond sawing. Its dual-surface work area consists of a perforated top, providing an expandable working area with integrated clamping points. This feature allows for effortless and secure attachment of workpieces, making it suitable for various applications including sanding, routing, and assembly. The MFT/3 also boasts a robust construction, ensuring durability and prolonged use under professional conditions.

Both tables are equipped with the Festool Precision and reliability that the brand is known for, including features such as the guide rail that allows for flawless longitudinal cuts and an adjustable height for user comfort. The tables utilize a combination of high-quality materials that guarantee stability and ease of maneuvering.

Additionally, the MFT/KAPEX and MFT/3 embrace advanced technology with features like the FastFix system for quick changeovers of accessories and the option to integrate with Festool’s dust extraction systems, promoting a cleaner work environment and improved health safety for users.

These multifunction tables embody Festool’s commitment to innovation, meeting the diverse needs of the modern woodworker. Whether you are a professional contractor on a job site or a dedicated hobbyist in your workshop, the MFT/KAPEX and MFT/3 deliver unmatched versatility and precision, enabling you to achieve exceptional results in your woodworking projects.
Top Page Image Contents