Festool MFT/KAPEX, MFT/3 Calibrating angle, Adjusting the pre-set Profile setting rail

Page 8

8

90°

9-1

9-2

 

9-3

9

9-4

Step 6: Calibrating angle

Check the angle setting of the pre-set pro- file setting rail before starting work. Align the guide rail first of all [Fig. 8].

Align the guide rail at right angles to the pre-set profile setting rail. If an angle of 90° is not possible, slide a support unit on the guide rail until the angle is correct. Se- cure the guide rail.

NOTE: Slide the relevant stop [4-3] along the table profile to retain the setting per- manently.

If required, the pre-set profile setting rail can also be aligned in relation to the per- forated top provided the necessary clamps (accessories) are available.

Insert the clamps [9-1] and [9-2] as shown in Fig. [9] and move the stop ruler [9-3] to a 90° position.

If the stop ruler does not rest evenly against the clamps:

Loosen the screws [9-4] and the rotary knob [7-2]. The retaining pin must be en- gaged in the 90° notch.

Set the angle at 90° in relation to the clamps and tighten the screws.

Step 7: Adjusting the pre-set

profile setting rail

Risk of injury! Always use the fence in a fixed position and do not use to slide the workpiece along!

Risk of injury! Make sure that all rotary knobs on the fence are tight- ened before starting work.

The fence can be adjusted in the following ways:

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Guide d’utilisation Manual de instruccionesPage Table of Contents Technical dataIntended use SymbolsDesign Trim splinter guard MFT/3 Setting up and assemblySetting up Setting up Guide rail support Front Working sideAttaching the pre-set Profile setting rail Attaching the guide railAdjusting the pre-set Profile setting rail Calibrating angleAdjusting the guide rail Relation to the workpiece Adjustment parallel to the bench edgeAdjustment at right angles to Bench edge Adjusting the stop ruler LengthwaysMaintenance Accessories, toolsMounting the Kapex Turning the perforated topWarranty Conditions of 1+2 Warranty Festool Limited WarrantyPage Table des matières Caractéristiques techniquesLa poussière, un ris Que pour la santéSymboles Eléments fournisUtilisation conforme1-4aux Prescriptions MFT/3Etape 2 Sciage du pare-éclats Installation et montageEtape 1 Installation Etape 3 Mis en place des fixations du rail de guidageEtape 5 Montage de la guide Butée angulaire Etape 6 Réglage de la Butée angulaireDécalage parallèlement par rapport Au bord de la tableDécalage perpendiculairement par Rapport au bord de la tableDécalage angulaire à laide de Léchelle graduée Etape 8 Réglage du rail de gui Dage par rapport à la pièceDécalage de la règle de butée Dans le sens longitudinal Retournement de la plaque Trouée Installation de loutil KapexAccessoires, outils Garantie Conditions de la ga Rantie 1+2 ans Garantie limitée de FestoolPage Contenido Datos técnicosRiesgos para la salud pro Ducidos por el polvoUso conforme a lo previsto SímbolosDotación de suministro Paso 2 Serrar la protección an Ti-astillas MFT/3 Instalación y montajePaso 1 Instalación Paso 3 Fijar los soportes para El riel de guía Parte posterior DelantePaso 4 Fijar el riel de guía Paso 5 Montaje del tope angu Lar escalonadoPaso 6 Ajustar el tope angular Paso 7 Ajuste del tope angular Escalonado Paso 8 Ajuste del riel de guía a La pieza de trabajoReverso de la placa perforada Instalación de la KapexMantenimiento Garantía limitada de Festool Accesorios, herramientasGarantía Condiciones de la Ga Rantía 1 +

MFT/3, MFT/KAPEX specifications

The Festool MFT/KAPEX and MFT/3 represent a harmonization of craftsmanship, precision, and versatility designed specifically for woodworking professionals and enthusiasts alike. These multifunctional tables are not merely work surfaces; they are engineered tools that enhance the entire woodworking experience.

The MFT/KAPEX is a portable, multi-functional work table designed to work seamlessly with the KAPEX mitre saw. One of its standout features is the integrated guide rail system, which allows for precise cuts and efficient handling of large materials. The table is equipped with a clamping system that secures workpieces, ensuring stability and accuracy during cutting operations. Another key characteristic is its foldable design, enabling easy transport and storage, making it ideal for job-site use.

In contrast, the MFT/3 serves as a highly versatile workbench that accommodates various tasks beyond sawing. Its dual-surface work area consists of a perforated top, providing an expandable working area with integrated clamping points. This feature allows for effortless and secure attachment of workpieces, making it suitable for various applications including sanding, routing, and assembly. The MFT/3 also boasts a robust construction, ensuring durability and prolonged use under professional conditions.

Both tables are equipped with the Festool Precision and reliability that the brand is known for, including features such as the guide rail that allows for flawless longitudinal cuts and an adjustable height for user comfort. The tables utilize a combination of high-quality materials that guarantee stability and ease of maneuvering.

Additionally, the MFT/KAPEX and MFT/3 embrace advanced technology with features like the FastFix system for quick changeovers of accessories and the option to integrate with Festool’s dust extraction systems, promoting a cleaner work environment and improved health safety for users.

These multifunction tables embody Festool’s commitment to innovation, meeting the diverse needs of the modern woodworker. Whether you are a professional contractor on a job site or a dedicated hobbyist in your workshop, the MFT/KAPEX and MFT/3 deliver unmatched versatility and precision, enabling you to achieve exceptional results in your woodworking projects.
Top Page Image Contents