Troubleshooting

Before you request dealer service, check for these easily solved problems:

SCheck the indoor and outdoor disconnect switches (see Fig. 1.) Also check your main electrical panel circuit breakers or fuses.

SCheck for sufficient airflow. Air filter(s) should be reasonably clean and interior vents should be open and unobstructed.

S Check thermostat settings. For cooling, your desired temperature setting should be LOWER than the displayed room temperature, and the System/Mode control should be on Cool or Auto. For heating, your temperature setting should be HIGHER than the displayed room temperature, and the System/Mode control is set to Heat or Auto.

STime delays - depending on the Bryant Heat Pump model you have, there may be delays in unit operation that are built-in to protect the equipment and your comfort. Don’t be alarmed if you notice a time delay in operation. It may be a standard protection feature of your equipment. Check with your Bryant Dealer for more informationon time delays.

If you need to contact your Bryant dealer for troubleshooting and/or repairs, be sure to have the model and serial numbers of your equipment available (there are spaces on the cover for you to write this information). With this information, your dealer may be able to offer helpful suggestions over the phone or save valuable time through knowledgeable preparation for the service call.

REGULAR DEALER MAINTENANCE

In addition to the routine maintenance that you perform, your home comfort system should be inspected regularly by a properly trained service technician. Many dealers offer this service at a reduced rate with a service contract. Some service contracts offer additional benefits such as parts discounts and no additional charge for ”after hours” or emergency service.

Your annual system inspection should include:

SRoutine inspection of air filter(s) with replacement or cleaning as required

SInspection and cleaning of the blower wheel housing and motor S Inspection and, if required, cleaning of indoor and outdoor coils

S Inspection of the indoor coil drain pan, as well as the primary and secondary drain lines. If the system has an auxiliary drain pan and line, they should be inspected at this time as well. Service should include cleaning if required.

S Check all electrical wiring and connections

S Check for secure physical connections of individual parts in each unit

S Operational check of the Heat Pump system to determine actual working condition. Necessary repair and, or adjustment should be performed at this time.

WHATEVER IT TAKES!

With more than a century of experience, Bryant has always done whatever it takes to deliver superior comfort to homeowners nationwide. Bryant has been coming through since 1902.

Your Bryant air conditioning system, backed by the world’s best name in comfort and supported with expert installation, maintenance and service by your local Bryant dealer should offer you and your family years of reliable, energy efficient cooling comfort.

Central Air Conditioning System specifications

Bryant Central Air Conditioning Systems are known for their reliability, efficiency, and advanced technology, making them a popular choice among homeowners seeking climate comfort. These systems are designed to provide optimal cooling while ensuring energy efficiency and long-term performance.

One of the standout features of Bryant Central Air Conditioning Systems is their high SEER (Seasonal Energy Efficiency Ratio) ratings. Many models boast SEER ratings of 16 or higher, which translates to lower energy bills and a reduced environmental footprint. This efficiency not only helps in cooling the home effectively but also minimizes the impact on energy resources.

The use of advanced technologies sets Bryant apart from many competitors. For instance, Bryant employs the use of variable-speed compressors that adjust the cooling output based on the actual cooling needs of the home. This technology allows for quieter operation and improved humidity control, providing homeowners with a more comfortable indoor environment. Moreover, variable-speed operation helps to reduce energy consumption during low-demand periods significantly.

Durability is another hallmark of Bryant Air Conditioning Systems. The units are built with high-quality materials, such as galvanized steel cabinets coated with a corrosion-resistant finish, ensuring they withstand harsh weather conditions. This commitment to durability means homeowners can expect a longer lifespan from their systems.

Additionally, Bryant offers a range of models, catering to various needs and budgets. From the entry-level Preferred Series to the top-tier Evolution Series, customers can find a solution that fits their space and performance requirements. The Evolution Series, in particular, stands out for its smart technology features, including Wi-Fi connectivity and compatibility with the Bryant HouseWise smart thermostat, allowing homeowners to monitor and adjust their systems remotely.

Furthermore, Bryant places a strong emphasis on noise reduction. Many units have specifically designed sound blankets and compressor mounts that minimize operational noise, ensuring a quiet and comfortable environment indoors. With several models equipped with sound insulation features, home comfort is maintained without disruptive noise levels.

In summary, Bryant Central Air Conditioning Systems deliver reliable performance with a focus on energy efficiency, advanced technology, and durability. Whether homeowners seek budget-friendly options or high-end features, Bryant offers a broad selection to meet diverse cooling demands, ensuring a comfortable and controlled indoor climate year-round.