34
Reference
pages
Cause/solution
Symptom
•Are the power cord and coaxial cable connected appropri-
ately?
→Check whether the connection is appropriately estab-
lished.
Troubleshooting
No image displayed
Blurred image
Damaged power cord
sheathing
Heated portion of power
cord during use.
Warmed power cord or
loosened connection by
bending or stretching dur-
ing use.
LED not lit
14
•Is the monitor luminance appropriately adjusted, or is the
contrast appropriately adjusted?
→Check whether the monitor settings are appropriate. –
•Is the lens of the camera soiled with dirt or dust?
→Check whether the lens of the camera is clean. –
•Is the focus adjusted correctly?
→Check if the focus is adjusted correctly. 16
•The power cord is damaged.
Use of the damaged cord may cause electric shock or fire.
Turn off the power immediately and request repair to your
dealer.
–
Before asking for repairs, check the symptoms with the following table.
Contact your dealer if a problem cannot be solved even after checking and trying the solution in the table or a problem is not
described below.
•Is power supplied to the camera?
→Check whether power is supplied to the camera.
•Is "ON" selected for the LED setting?
→Check whether "ON" is selected for the LED setting.
–
31