m | Storing & Recalling Measurements (Model 41B) |
Storing & Recalling Measurements (Model 41B)
Model 41B allows you to store a maximum of eight waveforms (and associated data) for volts and amps. You can recall data that you have collected on site for later viewing and analysis. (If you store multiple waveforms in this manner, you will probably want to keep a written record identifying the waveforms by number.)
The Tester stores a measurement as digital data. You can recreate all related waveform, har onic, and text screen information, except Record, when you recall the waveform.
The Tester stores waveforms in nonvolatile memory. A low battery condition or a battery change does not jeopardize the stored waveforms.
Referring to Figure 18, use the following procedure to store and recall measurements:
1.Press mto access the waveform storage screen. The Tester freezes the existing waveform and shows the screen in Figure 18.
2.Press <or >to select the desired operation (RECALL, STORE, or CLEAR). Then press E.
3.Select one of the eight memory locations by pressing <or >to box one through eight. An underscore appears below a filled memory location.
a17s.eps
Figure 18. Memory Screen
39