39/41B STORE
Users Manual
4. STORE a waveform set (and associated data) into the boxed memory
location by pressing E. If the location was e pty, an underscore now appears bel w the memory location number. If the underscore already
existed, overwrites the old waveform.
CLEAR theonselected memory location (waveform and associated data) from the b xed memory location by pressing E.
RECALL the selected memory location to view the contents directly by
pressing .
In all three cases, the Tester holds the data represented by the waveform last seen the memory screen and returns to the previous display mode. While Hold is maintained, you can access various representations and computati ns about the waveform by selecting different measurement function and screen mode combinations. You can also send the associated data to a PC or a printer.
5. Release the memory display and return to the active display mode by pressing E.
Notes
You can clear all memory locations by holding mpressed while you press on.
MAX, AVG, and MIN information in the RECORD mode cannot be stored in a memory location.
40