Fluke 41B, 39 user manual Status Line

39/41B Users Manual

H	Table 2. Status Line
	L
	Hold active (screen frozen). appears in lower left screen
VPA	to indicate possible high voltage input that is not sensed
	during Hold.
	Phase Reference Selection. The volts input or the current
	inputAPis the reference for determining phase shift. Select
	when measuring current only with voltage test leads not
	connected.
2s	Smooth Selection. Smooth is active with averaging times of
5s	2, 5, 10, or 20 seconds. A higher number signifies a more
	stable measurement reading.
~10s
20s
OL-V	Volts Overload Condition for the selected range (over 600V
	if in AUTO).
OL-A	Amps Overload Condition for the selected range (exceeds
	2V peak if in AUTO). Since the input from the Current Probe
	is 1 mV/A, maximum current input is 2000A pk.
OL-VA	Both volts and amps maximum inputs have been exceeded.

Note

When an overload occurs, all measurement and computation data must be presumed invalid.

AUTO The Tester switches range automatically to deal with changing volts, amps, or watts readings.

MAN Tester does not switch ranges automatically.

MEMX Memory location (X) last accessed. (X = 1 to 8)

SEND Send is active (prints test reports, Model 41B.)

PRNT Print is active (prints screen dumps, Model 41B.)

20