Porter-Cable 70-200 instruction manual Drill Press

Page 1

20" Drill Press

(Model 70-200)

INSTRUCTION MANUAL

PART NO. A10355 - 04-06-05

Copyright © 2005 Delta Machinery

To learn more about DELTA MACHINERY	ESPAÑOL: PÁGINA 21
visit our website at: www.deltamachinery.com.
visit our website at: www.deltamachinery.com.
For Parts, Service, Warranty or other Assistance,

please call 1-800-223-7278 (In Canada call 1-800-463-3582).

Image 1

Contents Drill Press Important Safety Instructions Table of ContentsCalifornia Proposition Safety Guidelines DefinitionsImportant Safety Instructions General Safety RulesStay ALERT, Watch What YOU are DOING, USE of this Tool can GenerateFailure to Follow These Rules MAY Result in Serious Injury Additional Specific Safety RulesMotor Specifications Power ConnectionsGrounding Instructions Extension Cords Volt Single Phase OperationForeword Functional DescriptionCarton Contents Mounting the Machine AssemblyAssembling Drill Press Page Page Chuck KEY Locking Switch OFF Position Operational Controls and Adjustments START/STOP ControlsOperation Spindle SpeedsShould not Contact Spring Housing a When Tight Adjusting Spindle Return SpringDrilling Holes to Depth From ShaftRemoving Chuck and Spindle Adapter Table AdjustmentsCorrect Drilling Speeds Machine USEBoring in Wood Drilling Metal Troubleshooting MaintenanceAccessories ServiceWarranty Canadian PORTER-CABLE Delta Service Centers