CARTON CONTENTS
1
43
2
5
6
7
8
9
10
11
12
13
14
15
16
17
|
| Fig. 2 |
|
1. | Drill Press Head | 10. | 4mm Hex Wrench |
2. | Table and Table Bracket | 11. | 3mm Hex Wrench |
3. | Column | 12. | Worm Gear |
4. | Base | 13. | Table Raising and Lowering Handle |
5. | Chuck | 14. | Table Lock Lever |
6. | Handle (3) | 15. | Chuck Key |
7. | Spindle Adapter | 16. | M8x1.25x125mm carriage head screws (4), flat |
8. | Spindle Adapter Remover | washers (8), lockwashers (4), and hex nuts (4) (for | |
fastening drill press to a supporting surface) | |||
9. | 5mm Hex Wrench | 17. | M12x1.5x40mm Hex Head Screws (4) |
UNPACKING AND CLEANING
Carefully unpack the machine and all loose items from the shipping container(s). Remove the protective coating from all unpainted surfaces. This coating may be removed with a soft cloth moistened with kerosene (do not use acetone, gasoline or lacquer thinner for this purpose). After cleaning, cover the unpainted surfaces with a good quality household floor paste wax.
9