Porter-Cable CPLDC2540S instruction manual Storage

Page 19

STORAGE

Before you store the air compressor, make sure you do the following:

1.Review the "Maintenance" section on the preceding pages and perform scheduled maintenance as necessary.

2.Set the On/Auto/Off lever to “OFF”.

3.Turn the regulator counterclockwise and set the outlet pressure to zero.

4.Remove the air tool or accessory.

5.Pull ring on safety valve allowing air to bleed from the tank until tank pressure is approximately 20 psi. Release safety valve ring.

6.Drain water from air tank by opening drain valve on bottom of tank.

Water will condense in the air tank. If not drained, water will corrode and weaken the air tank causing a

risk of air tank rupture.

7.After the water has been drained, close the drain or drain valve.

NOTE: If drain valve is plugged, release all air pressure. The valve can then be removed, cleaned, then reinstalled.

8.Protect the electrical cord and air hose from damage (such as being stepped on or run over). Wind them loosely around the compressor handle. (If so equipped)

Store the air compressor in a clean and dry location.

19- ENG

A02250

Page 18 Page 20
Image 19
Page 18 Page 20
Contents CPLDC2540S ManualImportant Safety Instructions Safety Guidelines DefinitionsRisk of Explosion or Fire HazardRisk from Flying Objects Risk of BurstingRisk to Breathing Risk of Electrical ShockRisk from Moving Parts Risk of BurnsRisk of Falling Hazard Risk of Unsafe Operation CPLDC2540S SpecificationsGlossary Duty CycleAssembly AccessoriesTo Add Oil To Pump Improper Grounding can Result in Electrical Shock InstallationLocation of the Air Compressor Allow the Compressor to GET WET Grounding InstructionsVoltage and Circuit Protection Extension CordsKnow Your Air Compressor Description of Operation OperationMotor Thermal Overload Protector not shown Before StartingBefore Each Start-Up How to StartTo Drain Tank MaintenanceTo Check Safety Valve Customer Responsibilities Oil CheckingMotor Air Filter Inspection and ReplacementTo Replace or Clean Check Valve Service and AdjustmentsStorage Problem Cause Correction TroubleshootingPressure reading Problem Cause Correction Problem Cause Correction This Warranty is not Transferable and does not Cover Limited Warranty
Top Page Image Contents