Porter-Cable C2025 Maintenance, Customer Responsibilities, To Check Safety Valve, How to Start

Page 13

NOTE: The hose or accessory will require a quick connect plug if the air outlet is equipped with a quick connect socket.

Risk of Bursting. Too much air pressure causes a hazardous risk of bursting. Check the manufacturer’s maximum pressure rating for air tools and accessories. The regulator outlet pressure must never exceed the maximum pressure rating.

Risk of unsafe operation. Compressed air from the unit may contain water­ condensation and oil mist. Do not spray unfil­tered­ air at an item that could be damaged by moisture. Some air tools and accessories may require filtered air. Read the instruc­tions­ for the air tools and accessories.

How to Start

1.Set the On/Off switch to "On" and allow tank pressure to build. Motor will stop when tank pressure reaches "cut-out" pressure.

2.Turn regulator knob clockwise to increase pressure and stop when desired pressure is reached.

If any unusual noise or vibration is noticed, stop the compres- sor immediately and have it checked by a trained service technician.

The compressor is ready for use.

MAINTENANCE

Customer Responsibilities

 

Before

Daily

 

each use

or after

 

 

each

 

 

use

Check Safety Valve

X

 

 

 

 

Drain Tank

 

X

 

 

 

Unit cycles automatically when power is on. When performing maintenance, you may be exposed to voltage sources, compressed air, or moving parts. Personal injuries can occur. Before performing any maintenance or repair, disconnect power source from the compressor and bleed off all air pressure.

NOTE: See Operation section for the location of controls.

To Check Safety Valve

Risk of Bursting. If the safety valve does not work properly, over-pressurization may occur, causing air tank rupture or an explosion.

Risk from Flying Objects. Always wear certified safety

equipment: ANSI Z87.1 eye protection (CAN/CSA Z94.3) with side shields.

1.Before starting compressor, pull the ring on the safety valve to make sure that the safety valve operates freely. If the valve is stuck or does not operate smoothly, it must be replaced with the same type of valve.

13 - ENG

N000732

Page 12 Page 14
Image 13
Page 12 Page 14
Contents C2025 Important Safety Instructions Safety Guidelines DefinitionsHazard Risk to Breathing Asphyxiation What can happen How to prevent itRisk of Bursting Attachments & accessoriesTires Electrical Grounding Failure Risk of Electrical ShockRisk from Flying Objects Risk from Moving Parts Risk of Hot surfaces What can happen How to prevent itRisk of Falling Risk of Unsafe Operation What can happen How to prevent itRisk from noise Accessories SpecificationsGlossary Duty CycleInstallation AssemblyUnpacking Grounding InstructionsVoltage and Circuit Protection Extension CordsKnow Your Air Compressor OperationDescription of Operation Motor Overload Protector not shown How to StopBefore Each Start-Up To Check Safety Valve MaintenanceHow to Start Customer ResponsibilitiesTo Replace or Clean Check Valve Service and AdjustmentsTo Drain Tank To Replace Regulator Storage ServiceTroubleshooting Problem Cause Correction Problem Cause Correction Full One Year Warranty Consignes DE Sécurité Importantes Mesures DE Sécurité DéfinitionsÉvité, pourrait causer de graves Blessures ou la mort Dommages à la propriétéCompresseur dans une zone bien Risque d’Éclatement Ce qui peut se produire Comment l’ÉviterPneus Accessoires Directives relatives à la mise à la Mise à la terre électrique le fait dePiÈces mobiles Risque associÉ auxRisque DE Chute Risque associÉ au bruit LexiqueModèle no C2025 Accessoires Cycle DE ServiceEmplacement du compresseur dair AssemblageRallonges Familiarisez-vous avec votre compresseur dair UtilisationDescription du fonctionnement Arrêt de lappareil Utilisation de lappareilMise en marche Avant chaque mise en marcheResponsabilités du client EntretienVérification de la soupape de sûreté Vidange du réservoirRemplacement ou nettoyage de la soupape de retenue Pour remplacer le régulateu RangementPièces DE Rechange Dépannage Remarque Ajustez Problème Cause Correction Garantie complète d’un 1 an Remplacement Gratuit DES Étiquettes D’AVERTISSEMENT si lesInstrucciones Importantes DE Seguridad Definiciones DE Normas DE SeguridadPeligro ¿Qué puede suceder? Cómo evitarlo Riesgo de explosiónNeumáticos Elementos y accesoriosRiesgo de objetos despedidos Riesgo por piezas móviles Riesgo por ruidos Riesgo de operación inseguraGlosario Cuadro DE EspecificacionesCiclo DE Servicio Modelo Nº C2025Instalación EnsamblajeDesempaque Ubicación del compresor de aireProtección del voltaje y del circuito Cables de extensión eléctricaConozca su compresor de aire OperaciónDescripción de operaciones Cómo detenerla Cómo utilizar su unidadResponsabilidades del cliente MantenimientoAntes de cada puesta en marcha Cómo drenar el tanque Cómo verificar la válvula de seguridadPara reemplazar o limpiar la válvula retención Servicio Y AjustesPara reemplazar el regulador AlmacenajeAccesorios ServicioGuía DE Diagnóstico DE Problemas Usando el accesorio El motor no funciona Fusible fundido Garantía completa de un año N000732 Deltaportercable.com 

C2025 specifications

The Porter-Cable C2025 is a powerful and versatile air compressor designed for both professional contractors and DIY enthusiasts. With a robust motor and innovative features, this compressor stands out in the competitive market of pneumatic tools.

One of the main features of the C2025 is its 2.5-gallon tank, which provides a good balance between portability and performance. This size is perfect for various applications, including inflating tires, powering nail guns, and operating air tools. The tank is made from durable materials, ensuring it can withstand the rigors of job site use.

The air compressor is equipped with a 0.8-horsepower motor that delivers a maximum pressure of 125 PSI. This output ensures that users have sufficient power for a wide range of tasks without the need for tweaking or additional setups. The C2025 is designed to recover quickly, allowing users to maintain productivity without long waiting times between uses.

One of the advanced technologies integrated into the Porter-Cable C2025 is the oil-free pump. This feature eliminates the need for regular maintenance associated with traditional oil-lubricated pumps, making the C2025 a hassle-free option for users. The oil-free design also contributes to cleaner air output, making it suitable for sensitive applications.

Portability is another notable characteristic of the C2025. It comes with a lightweight design and features a comfortable carry handle, allowing users to transport it easily from one job site to another. The compressor's compact size makes storage simple, fitting neatly in closets or vehicle trunks.

The noise level of the C2025 is impressively low, operating at only 75 decibels. This makes it a more user-friendly option, especially in noise-sensitive environments. Additionally, the compressor is built with safety measures, including thermal overload protection, to ensure reliable operation without overheating.

In summary, the Porter-Cable C2025 air compressor combines a powerful motor, a convenient oil-free pump, and a lightweight design, making it an ideal choice for a variety of tasks. Whether for professional use or home projects, the C2025 delivers reliability and efficiency that users can depend on. With its balance of performance and portability, this compressor is a valuable tool in any workshop or job site.
Top Page Image Contents