Porter-Cable C2025 instruction manual Assembly, Installation, Unpacking, Grounding Instructions

Page 9
Plug
Grounding Pin

ASSEMBLY

Unpacking

1.Remove unit from carton and discard all packaging.

INSTALLATION

HOW TO SET UP YOUR UNIT

Location of the Air Compressor

•Locate the air compressor in a clean, dry and well ventilated area.

•The air compressor should be located at least 12" (30.5 cm) away from the wall or other obstructions that will interfere with the flow of air.

•The air compressor pump and shroud are designed to allow for proper cooling.

The ventilation openings on the compressor are necessary to maintain proper operating temperature. Do not place rags or other containers on or near these openings.

Grounding Instructions

Risk of Electrical Shock. In the event of a short circuit, ground- ing reduces the risk of shock by providing an escape wire for the electric cur- rent. This air compressor must be properly grounded.

The portable air compressor is equipped with a cord having a grounding wire with an appropriate grounding plug (see following illustrations).

1.The cord set and plug with this unit contains a grounding pin. This plug

MUST be used with a grounded outlet.

IMPORTANT: The outlet being used must be installed and grounded in accordance with all local codes and ordinances.

2.Make sure the outlet being used has the same configuration as the ground- ed plug. DO NOT USE AN ADAPTER.

See illustration.

3. Inspect the plug and cord before each

use. Do not use if there are signs of damage.

Grounded Outlets

4.If these grounding instructions are not completely understood, or if in doubt as to whether the compressor is properly grounded, have the installation checked by a qualified electrician.

Risk of Electrical Shock. IMPROPER GROUNDING CAN RESULT IN ELECTRICAL SHOCK.

Do not modify the plug provided. If it does not fit the available outlet, a correct outlet should be installed by a qualified electrician.

Repairs to the cord set or plug MUST be made by a qualified electrician.

9 - ENG

N000732

Page 8 Page 10
Image 9
Page 8 Page 10
Contents C2025 Safety Guidelines Definitions Important Safety InstructionsHazard Risk to Breathing Asphyxiation What can happen How to prevent itAttachments & accessories Risk of BurstingTires Risk of Electrical Shock Electrical Grounding FailureRisk from Flying Objects Risk from Moving Parts Risk of Hot surfaces What can happen How to prevent itRisk of Unsafe Operation What can happen How to prevent it Risk of FallingRisk from noise Accessories SpecificationsGlossary Duty CycleInstallation AssemblyUnpacking Grounding InstructionsVoltage and Circuit Protection Extension CordsOperation Know Your Air CompressorDescription of Operation How to Stop Motor Overload Protector not shownBefore Each Start-Up To Check Safety Valve MaintenanceHow to Start Customer ResponsibilitiesService and Adjustments To Replace or Clean Check ValveTo Drain Tank To Replace Regulator Storage ServiceTroubleshooting Problem Cause Correction Problem Cause Correction Full One Year Warranty Consignes DE Sécurité Importantes Mesures DE Sécurité DéfinitionsÉvité, pourrait causer de graves Blessures ou la mort Dommages à la propriétéCompresseur dans une zone bien Risque d’Éclatement Ce qui peut se produire Comment l’ÉviterPneus Accessoires Directives relatives à la mise à la Mise à la terre électrique le fait dePiÈces mobiles Risque associÉ auxRisque DE Chute Lexique Risque associÉ au bruitModèle no C2025 Accessoires Cycle DE ServiceEmplacement du compresseur dair AssemblageRallonges Utilisation Familiarisez-vous avec votre compresseur dairDescription du fonctionnement Arrêt de lappareil Utilisation de lappareilMise en marche Avant chaque mise en marcheResponsabilités du client EntretienVérification de la soupape de sûreté Vidange du réservoirRemplacement ou nettoyage de la soupape de retenue Pour remplacer le régulateu RangementPièces DE Rechange Dépannage Remarque Ajustez Problème Cause Correction Garantie complète d’un 1 an Remplacement Gratuit DES Étiquettes D’AVERTISSEMENT si lesInstrucciones Importantes DE Seguridad Definiciones DE Normas DE SeguridadPeligro ¿Qué puede suceder? Cómo evitarlo Riesgo de explosiónNeumáticos Elementos y accesoriosRiesgo de objetos despedidos Riesgo por piezas móviles Riesgo por ruidos Riesgo de operación inseguraGlosario Cuadro DE EspecificacionesCiclo DE Servicio Modelo Nº C2025Instalación EnsamblajeDesempaque Ubicación del compresor de aireProtección del voltaje y del circuito Cables de extensión eléctricaOperación Conozca su compresor de aireDescripción de operaciones Cómo detenerla Cómo utilizar su unidadMantenimiento Responsabilidades del clienteAntes de cada puesta en marcha Cómo drenar el tanque Cómo verificar la válvula de seguridadPara reemplazar o limpiar la válvula retención Servicio Y AjustesPara reemplazar el regulador AlmacenajeAccesorios ServicioGuía DE Diagnóstico DE Problemas Usando el accesorio El motor no funciona Fusible fundido Garantía completa de un año N000732 Deltaportercable.com 

C2025 specifications

The Porter-Cable C2025 is a powerful and versatile air compressor designed for both professional contractors and DIY enthusiasts. With a robust motor and innovative features, this compressor stands out in the competitive market of pneumatic tools.

One of the main features of the C2025 is its 2.5-gallon tank, which provides a good balance between portability and performance. This size is perfect for various applications, including inflating tires, powering nail guns, and operating air tools. The tank is made from durable materials, ensuring it can withstand the rigors of job site use.

The air compressor is equipped with a 0.8-horsepower motor that delivers a maximum pressure of 125 PSI. This output ensures that users have sufficient power for a wide range of tasks without the need for tweaking or additional setups. The C2025 is designed to recover quickly, allowing users to maintain productivity without long waiting times between uses.

One of the advanced technologies integrated into the Porter-Cable C2025 is the oil-free pump. This feature eliminates the need for regular maintenance associated with traditional oil-lubricated pumps, making the C2025 a hassle-free option for users. The oil-free design also contributes to cleaner air output, making it suitable for sensitive applications.

Portability is another notable characteristic of the C2025. It comes with a lightweight design and features a comfortable carry handle, allowing users to transport it easily from one job site to another. The compressor's compact size makes storage simple, fitting neatly in closets or vehicle trunks.

The noise level of the C2025 is impressively low, operating at only 75 decibels. This makes it a more user-friendly option, especially in noise-sensitive environments. Additionally, the compressor is built with safety measures, including thermal overload protection, to ensure reliable operation without overheating.

In summary, the Porter-Cable C2025 air compressor combines a powerful motor, a convenient oil-free pump, and a lightweight design, making it an ideal choice for a variety of tasks. Whether for professional use or home projects, the C2025 delivers reliability and efficiency that users can depend on. With its balance of performance and portability, this compressor is a valuable tool in any workshop or job site.
Top Page Image Contents