Porter-Cable C2025 Service and Adjustments, To Drain Tank, To Replace or Clean Check Valve

Page 14

To Drain Tank

Risk of Unsafe Operation. Risk from noise. Air tanks contain high pressure air. Keep face and other body parts away from outlet of drain. Use ANSI Z87.1 eye protection (CAN/CSA Z94.3) when draining as debris can be kicked up into face. Use ear protection [(ANSI S12.6 (S3.19) hearing protection] as air flow noise is loud when draining.

1.Set the On/Off switch to "Off".

2.Turn the regulator knob counter-clockwise to set the outlet pressure to zero.

3.Remove the air tool or accessory.

4.Pull ring on safety valve allowing air to bleed from the tank until tank pressure is approximately 20 psi. Release safety valve ring.

5.Drain water from air tank by opening drain valve on bottom of tank.

Risk of Bursting. Water will condense in the air tank. If not drained, water will corrode and weaken the air tank causing a risk of air tank rupture.

Risk of Property Damage. Drain water from air tank may con- tain oil and rust which can cause stains.

6.After the water has been drained, close the drain valve. The air compressor can now be stored.

NOTE: If drain valve is plugged, release all air pressure. The valve can then be removed, cleaned, the reinstalled.

SERVICE AND ADJUSTMENTS

ALL MAINTENANCE AND REPAIR OPERATIONS NOT LISTED MUST BE PERFORMED BY TRAINED SERVICE TECHNICIAN.

Risk of Unsafe Operation. Unit cycles automatically when power is on. When servicing, you may be exposed to voltage sources, compressed air, or moving parts. Before servicing unit unplug or disconnect electrical supply to the air compressor, bleed tank of pressure, and allow the air compressor to cool.

To Replace or Clean Check Valve

1.Release all air pressure from air tank. See "To Drain Tank" in the Maintenance section.

2.Unplug unit.

3.Remove the hose by removing the hose clamp. NOTE: The hose clamp is not reusable. You must purchase a new hose clamp, purchase a standard hose clamp at a local hardware store.

4.Unscrew the check valve (turn coun- ter-clockwise) using a socket wrench.

5.Make sure the valve disc moves freely inside the check valve and the spring holds the disc in the upper, closed position. The check valve may be cleaned with a solvent, such as paint and varnish remover.

Hose

Clamp

Check

Valve

6.Apply sealant to the check valve threads. Reinstall the check valve (turn clock- wise).

N000732

14 - ENG

Page 13 Page 15
Image 14
Page 13 Page 15
Contents C2025 Hazard Safety Guidelines DefinitionsImportant Safety Instructions What can happen How to prevent it Risk to Breathing AsphyxiationTires Attachments & accessoriesRisk of Bursting Risk from Flying Objects Risk of Electrical ShockElectrical Grounding Failure Risk of Hot surfaces What can happen How to prevent it Risk from Moving PartsRisk from noise Risk of Unsafe Operation What can happen How to prevent itRisk of Falling Glossary SpecificationsAccessories Duty CycleUnpacking AssemblyInstallation Grounding InstructionsExtension Cords Voltage and Circuit ProtectionDescription of Operation OperationKnow Your Air Compressor Before Each Start-Up How to StopMotor Overload Protector not shown How to Start MaintenanceTo Check Safety Valve Customer ResponsibilitiesTo Drain Tank Service and AdjustmentsTo Replace or Clean Check Valve To Replace Regulator Service StorageTroubleshooting Problem Cause Correction Problem Cause Correction Full One Year Warranty Évité, pourrait causer de graves Mesures DE Sécurité DéfinitionsConsignes DE Sécurité Importantes Blessures ou la mort Dommages à la propriétéCompresseur dans une zone bien Ce qui peut se produire Comment l’Éviter Risque d’ÉclatementAccessoires  PneusMise à la terre électrique le fait de Directives relatives à la mise à laRisque associÉ aux PiÈces mobilesRisque DE Chute Modèle no C2025 LexiqueRisque associÉ au bruit Emplacement du compresseur dair Cycle DE ServiceAccessoires AssemblageRallonges Description du fonctionnement UtilisationFamiliarisez-vous avec votre compresseur dair Utilisation de lappareil Arrêt de lappareilAvant chaque mise en marche Mise en marcheVérification de la soupape de sûreté EntretienResponsabilités du client Vidange du réservoirRemplacement ou nettoyage de la soupape de retenue Rangement Pour remplacer le régulateuPièces DE Rechange Dépannage Remarque Ajustez Problème Cause Correction Remplacement Gratuit DES Étiquettes D’AVERTISSEMENT si les Garantie complète d’un 1 anDefiniciones DE Normas DE Seguridad Instrucciones Importantes DE SeguridadPeligro Riesgo de explosión ¿Qué puede suceder? Cómo evitarloElementos y accesorios NeumáticosRiesgo de objetos despedidos Riesgo por piezas móviles Riesgo de operación insegura Riesgo por ruidosCiclo DE Servicio Cuadro DE EspecificacionesGlosario Modelo Nº C2025Desempaque EnsamblajeInstalación Ubicación del compresor de aireCables de extensión eléctrica Protección del voltaje y del circuitoDescripción de operaciones OperaciónConozca su compresor de aire Cómo utilizar su unidad Cómo detenerlaAntes de cada puesta en marcha MantenimientoResponsabilidades del cliente Cómo verificar la válvula de seguridad Cómo drenar el tanqueServicio Y Ajustes Para reemplazar o limpiar la válvula retenciónAlmacenaje Para reemplazar el reguladorServicio AccesoriosGuía DE Diagnóstico DE Problemas Usando el accesorio El motor no funciona Fusible fundido Garantía completa de un año N000732 Deltaportercable.com 

C2025 specifications

The Porter-Cable C2025 is a powerful and versatile air compressor designed for both professional contractors and DIY enthusiasts. With a robust motor and innovative features, this compressor stands out in the competitive market of pneumatic tools.

One of the main features of the C2025 is its 2.5-gallon tank, which provides a good balance between portability and performance. This size is perfect for various applications, including inflating tires, powering nail guns, and operating air tools. The tank is made from durable materials, ensuring it can withstand the rigors of job site use.

The air compressor is equipped with a 0.8-horsepower motor that delivers a maximum pressure of 125 PSI. This output ensures that users have sufficient power for a wide range of tasks without the need for tweaking or additional setups. The C2025 is designed to recover quickly, allowing users to maintain productivity without long waiting times between uses.

One of the advanced technologies integrated into the Porter-Cable C2025 is the oil-free pump. This feature eliminates the need for regular maintenance associated with traditional oil-lubricated pumps, making the C2025 a hassle-free option for users. The oil-free design also contributes to cleaner air output, making it suitable for sensitive applications.

Portability is another notable characteristic of the C2025. It comes with a lightweight design and features a comfortable carry handle, allowing users to transport it easily from one job site to another. The compressor's compact size makes storage simple, fitting neatly in closets or vehicle trunks.

The noise level of the C2025 is impressively low, operating at only 75 decibels. This makes it a more user-friendly option, especially in noise-sensitive environments. Additionally, the compressor is built with safety measures, including thermal overload protection, to ensure reliable operation without overheating.

In summary, the Porter-Cable C2025 air compressor combines a powerful motor, a convenient oil-free pump, and a lightweight design, making it an ideal choice for a variety of tasks. Whether for professional use or home projects, the C2025 delivers reliability and efficiency that users can depend on. With its balance of performance and portability, this compressor is a valuable tool in any workshop or job site.
Top Page Image Contents