Lexmark 9500 Series manual Understanding the Photo Edit Mode menu, 120

6Press to select a photo for editing and printing.

7Press .

8Press to select Edit Photo.

From here	You can
Brightness	Adjust the brightness of a photo.
Rotate	Rotate a photo in 90-degree increments clockwise or counterclockwise.
Crop	Crop a photo.
Auto Enhance	Enhance a photo automatically.
Remove Red Eye	Reduce the red-eye effect caused by light reflection.
Colorized Effect	Select whether to print a photo in black and white, sepia, antique brown,
	or antique gray. These effects can make photos appear old or antique.
Frames	Select a frame for the photo.

9Make your selections using the control panel buttons.

10Pressto save your changes.

11Pressto go back to the photo.

12Press or to select the number of copies to print. Note: The number of copies is automatically set to 1.

13You can select more photos for printing and editing by repeating step 5 through step 12.

14Press to go to the print preview screen.

15If you want to adjust the print settings:

aPress .

bMake your selections using the control panel buttons.

cPressto save your selections, and then go back to the print preview screen.

16Press to print.

Note: To prevent smudging or scratching, avoid touching the printed surface with your fingers or sharp objects. For best results, remove each printed sheet individually from the paper exit tray, and allow the prints to dry at least 24 hours before stacking, displaying, or storing.

Understanding the Photo Edit Mode menu

Use the Photo Edit Mode menu to edit photos before printing. You can access the menu while viewing a photo.

1Insert a memory card or flash drive.

2From the control panel, press .

3Press to select Browse and Print Photos.

4Press or to navigate through the photos.

Working with photos

120