Lexmark 9500 Series manual Changing the default scan settings, 143

From here

Scan to

Color

Quality

Original Size

Change Scan Default

Settings

You can

Choose the computer receiving the scan, if there is more than one computer connected to the printer.

Choose to scan your document in color or black and white.

Choose a scan quality: 150 dots per inch (dpi), 300 dpi, or 600 dpi.

Set the size of the original document.

Change the default scan settings. These settings are for color, quality, and original size.

Changing the default scan settings

1From the control panel, press or repeatedly until Scan is highlighted.

2Press .

3If your printer is connected to more than one computer:

aPress or repeatedly until the computer to which you want to scan is highlighted.

bPress .

If you set a PIN during network setup and are being asked for it:

1 Enter the PIN using and to select a digit location and and to select a value for that digit. 2 Press .

4Wait until the printer has finished downloading the scan applications list.

5Press or repeatedly until Change Scan Default Settings is highlighted.

6 Press .
	From here	You can
	Color	Choose to scan your document in color or black and white.
	Quality	Choose a scan quality: Automatic, 150 dots per inch (dpi), 300 dpi, or 600 dpi.
	Original Size	Set the size of the original document: Auto Detect, L, 2L, A6, A5, B5, A4, Wallet,
		3 in x 5 in, 4 in x 6 in, 4 in x 8 in, 5 in x 7 in, 8 in x 10 in, or letter.

7Use the control panel buttons to navigate the menu items and make your choices.

8Pressto save your settings.

Scanning

143