Lexmark 9500 Series manual Glossy photo paper or transparencies stick together, 210

MAKE SURE THE TRUETYPE FONT IS AVAILABLE ON THE COMPUTER

The font you are trying to print may not be available in the program font selection box. Not all fonts are designed to be printed; make sure the font is a TrueType font. See the program documentation for more information.

MAKE SURE THE DOCUMENT WAS FORMATTED OR CREATED FOR THE PRINTER

Windows may substitute different fonts. Line and page breaks may change with the font. Use the program that created the document to fix these problems, and then save the changes for the next time you print.

Colors on printout are faded or differ from colors on the screen

Check the following. When you think you have solved the problem, test the solution by sending a document to print.

ARE THE COLOR AND PRINT SPEED SETTINGS CORRECT?

You may need to adjust the color and print speed.

ARE THE PRINT CARTRIDGES LOW ON INK?

1Do one of the following:

•In Windows Vista, click Œ Control Panel.

•In Windows XP or 2000, click Start.

2Click Programs or All Programs ŒLexmark 9500 Series.

3Click Solution Center.

4If an exclamation point (!) appears on either of the print cartridges, the ink level is low. Install a new cartridge.

Glossy photo paper or transparencies stick together

DO PHOTOS OR TRANSPARENCIES DRY AND STICK TOGETHER ON THE PAPER EXIT TRAY?

Remove the photos or transparencies from the paper exit tray as they exit the printer. Allow them to dry before stacking. It takes longer for the ink to dry on the surface of photo paper or transparencies than it does on most printouts.

ARE YOU USING A TRANSPARENCY OR PHOTO PAPER DESIGNED FOR AN INKJET PRINTER?

For more information on the types of paper you can use with the printer, see “Choosing compatible specialty paper types” on page 96.

Troubleshooting

210