Lexmark 9500 Series manual Printing using Bluetooth, 110

Models: 9500 Series

1 290
Download 290 pages 41.72 Kb
Page 110
Image 110

Printing using Bluetooth

You can print photos from a Bluetooth-enabled device such as a camera phone using a Bluetooth adapter.

1Load photo paper with the glossy or printable side facing down. (If you are not sure which side is the printable side, see the instructions that came with the paper.)

2Make sure that the Bluetooth Enable and Discovery Mode menu items on your printer control panel are set to On. For more information, see “Setting the Bluetooth mode” on page 109.

3Insert a Bluetooth adapter into the PictBridge port on the front of the printer.

SD/MMC

MS

XD

CF/MD

 

 

PictBr

 

idge

Note: A Bluetooth adapter is sold separately.

4Once the printer detects the Bluetooth adapter, the following message appears on the printer display for five seconds: Bluetooth Dongle Connected.

Warning—Potential Damage: Do not touch cables, the Bluetooth adapter, or the printer in the area shown while actively printing from the Bluetooth-enabled device. A loss of data can occur. Also, do not remove the Bluetooth adapter while actively printing from the Bluetooth-enabled device.

SD/M

 

MS

MC

XD

C

 

F/MD

 

 

 

PictBr

 

 

idge

5To print photos from your Bluetooth-enabled device, see the documentation that came with the product.

Notes:

To prevent smudging or scratching, avoid touching the printed surface with your fingers or sharp objects. For best results, remove each printed sheet individually from the paper exit tray, and allow the prints to dry at least 24 hours before stacking, displaying, or storing.

If a Bluetooth adapter is removed, the printer detects that it is missing and the following message appears on the printer display for five seconds: Bluetooth Dongle Disconnected.

Printing

110

Page 110
Image 110
Lexmark 9500 Series manual Printing using Bluetooth, 110