Lexmark 9500 Series manual Understanding the Paper Handling menu, From here You can

Load up to

50 transparencies in letter or A4 size

25 sheets of heavyweight matte paper

25 sheets of photo/glossy paper

25 sheets of card stock

Note: Tray 2 supports only letter-, A4-, or legal-size paper. For small paper sizes, use the small media feeder in Tray 1.

Make sure

•You load letter- or A4-size transparencies.

•You remove any paper backing sheets from the transparencies before loading.

•The paper guides rest against the left, right, and bottom edges of the transparencies.

•The glossy or printable side of the paper faces down. (If you are not sure which side is the printable side, see the instructions that came with the paper.)

•The paper guides rest against the left, right, and bottom edges of the paper.

Note: Photos require more drying time. To prevent smudging or scratching, avoid touching the printed surface with your fingers or sharp objects. For best results, remove each printed sheet individually from the paper exit tray, and allow the prints to dry at least 24 hours before stacking, displaying, or storing.

Understanding the Paper Handling menu

The Paper Handling menu has different options depending on whether the optional Tray 2 is installed. You can access the Paper Handling menu from a variety of menus related to copying, printing and editing photos, printing using the PictBridge default print settings, printing using Bluetooth technology, printing document files, printing faxes, and so on. The menu can also be accessed when you are changing the default settings for various functions.

To access the Paper Handling menu from the Setup menu:

1From the control panel, press or repeatedly until Setup is highlighted.

2Press .

3Press or repeatedly until Paper Handling is highlighted.

4Press .

5After changing values, pressto save your selections as the default settings.

From here		You can
Size		Specify the size of the paper loaded.
		Appears when Tray 2 is not installed.
Type		Specify the type of paper loaded.
		Appears when Tray 2 is not installed.
Size - Tray 1		Specify the size of the paper loaded in Tray 1.
		Appears when Tray 2 is installed.
Type - Tray 1		Specify the type of paper loaded in Tray 1.
		Appears when Tray 2 is installed.
Size - Tray 2		Specify the size of the paper loaded in Tray 2.
		Appears when Tray 2 is installed.
	Loading paper and original documents

85