Lexmark 9500 Series manual Loading transparencies in Tray, Loading iron-on transfers in Tray

3The paper guides rest against the left, right, and bottom sides of the cards.

Note: Photo cards require more drying time. Remove each photo as it exits, and allow it to dry to avoid ink smudging.

Loading transparencies in Tray 1

You can load up to 50 transparencies at a time.

1Load transparencies with the rough side facing down.

2If the transparencies have a removable strip, each strip should face down.

3Make sure:

•You load letter- or A4-size transparencies.

•You remove any paper backing sheets from the transparencies before loading.

•The paper guides rest against the left, right, and bottom edges of the transparencies.

Notes:

•Transparencies with paper backing sheets are not recommended.

•Transparencies require more drying time. Remove each transparency as it exits, and allow it to dry to avoid ink smudging.

Loading iron-on transfers in Tray 1

You can load up to 10 iron-on transfers into the paper tray at once, but you will achieve best results loading them one at a time.

1Load iron-on transfers with the print side of the transfer facing down.

2Make sure:

•You follow the loading instructions that came with the iron-on transfers.

•The paper guides rest against the left, right, and bottom edges of the transfers.

Loading custom-size paper in Tray 1

You can load up to 25 sheets of custom-size paper at a time.

1Load paper into the paper tray with the printable side facing down.

2Make sure:

•The paper size fits within these dimensions: Width:

–76.0–216.0 mm

–3.0–8.5 inches

Length:

–127.0–432.0 mm

–5.0–17.0 inches

•The paper guides rest against the left, right, and bottom edges of the paper.

Loading paper and original documents

78