Lexmark 9500 Series Faxing using th e con t rol pane l, Sending a fax using the control panel

Faxingusingthecontrolpanel

Sending a fax using the control panel

Sending a fax using the control panel

This is the best way to send a fax if you are faxing documents that are already printed.

1Make sure the printer is on and is connected to a working phone line.

2Load an original document faceup into the Automatic Document Feeder (ADF) or facedown on the scanner glass.

Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the Automatic Document Feeder (ADF). Place these items on the scanner glass.

3From the control panel, press or repeatedly until Fax is highlighted.

4Press .

The Fax Mode menu appears.

5Enter a fax number. For more information on the methods you can use to enter a fax number, see the table that begins with step 4 on page 153.

Notes:

•You can include a calling card number as part of the fax number.

•A fax number can include up to 64 numbers, commas, periods, and/or the symbols * or #.

6Press to start the fax job.

Note: If you are scanning individual pages using the scanner glass, after each page is scanned, the message Would you like to include another page in the fax? appears to prompt you either to scan another page or to send the fax right away.

7If you want to send a fax to a group of numbers (broadcast fax), enter the fax numbers using any combination of the methods listed in the table that begins with step 4, until a maximum of 30 fax numbers have been entered.

Entering a fax number

1Make sure the printer is on and is connected to a working phone line.

2From the control panel, press or repeatedly until Fax is highlighted.

3Press .

The Fax Mode menu appears.

Faxing using the control panel

152