Lexmark 9500 Series manual Received fax has poor print quality, 244, Review Checklist for Sender

CHECK CARTRIDGES

1Remove the print cartridges.

2Make sure the sticker and tape have been removed.

1

2

3Reinsert the print cartridges.

Received fax has poor print quality

These are possible solutions. Try one or more of the following:

REVIEW CHECKLIST FOR SENDER

•Check that the quality of the original document is satisfactory.

•Resend the fax. There may have been a problem with the quality of the telephone line connection.

•Increase the fax scan resolution.

CHECK INK

Check the ink levels and install a new print cartridge if necessary.

DECREASE THE TRANSMISSION SPEED

1From the control panel, press or repeatedly until Fax is highlighted.

2Press .

3 Press or repeatedly until Fax Setup is highlighted.

4Press .

5Press or repeatedly until Dialing and Sending is highlighted.

6Press .

7Press or repeatedly until you reach Max Send Speed.

8Press or to select a lower transmission speed.

9Pressto save.

10Resend the fax.

11If the problem persists, repeat step 1 through step 10 to resend the fax at successively lower transmission speeds.

Note: 2400 bps is the lowest transmission speed.

Troubleshooting

244