Porter-Cable 33-420, 33-400, 33-422, 33-423), 33-421, 33-411, 33-403, 33-410, 16 Accessories, Warranty

Page 25

ACCESSORIES

A complete line of accessories is available from your Delta Supplier, Porter-Cable • Delta Factory Service Centers, and Delta Authorized Service Stations. Please visit our Web Site www.deltamachinery.com for a catalog or

for the name of your nearest supplier.

Since accessories other than those offered by Delta have not been tested with this product, use of such accessories could be hazardous. For safest operation, only Delta recommended accessories should be used with this product.

WARRANTY

Two Year Limited New Product Warranty

Delta will repair or replace, at its expense and at its option, any new Delta machine, machine part, or machine accessory which in normal use has proven to be defective in workmanship or material, provided that the customer returns the product prepaid to a Delta factory service center or authorized service station with proof of purchase of the product within two years and provides Delta with reasonable opportunity to verify the alleged defect by inspection. For all refurbished Delta product, the warranty period is 180 days. Delta may require that electric motors be returned prepaid to a motor manufacturer’s authorized station for inspection and repair or replacement. Delta will not be responsible for any asserted defect which has resulted from normal wear, misuse, abuse or repair or alteration made or specifically authorized by anyone other than an authorized Delta service facility or representative. Under no circumstances will Delta be liable for incidental or consequential damages resulting from defective products. This warranty is Delta’s sole warranty and sets forth the customer’s exclusive remedy, with respect to defective products; all other warranties, express or implied, whether of merchantability, fitness for purpose, or otherwise, are expressly disclaimed by Delta.

25

Image 25
Contents 14, 16, and 18 Long Arm Radial Saws Important Safety Instructions Table of ContentsCalifornia Proposition Safety Guidelines DefinitionsManual Before Operating the Machine General Safety RulesAdditional Specific Safety Rules Functional Description Carton ContentsGuide to Parts Unpacking and CleaningAssembly Cuttinghead and CROSS-CUT Stop to TRACK-ARM Table Boards and Fence Starter BOX to BaseBlade Guard and Anti Kickback Device Adjusting Table TOP Parallel to TRACK-ARMCutterhead Return Spring Operation Locking Switch in OFF PositionStarting and Stopping SAW Taking Side Motion OUT of OVER-ARM Adjusting Ball Bearings Against Track RodsTightening Yoke Against Bearing Carriage Adjusting Track Rods Adjusting Bevel Clamp Handle Adjusting Blade Square with Table TOPAdjusting TRACK-ARM Clamp Handle Adjusting SAW Travel Square with Fence Removing Heeling in SAW CUT Adjustable CROSS-CUT StopChecking and Adjusting Automatic Brake Adjusting Blade GuardUsing a Table Extension Adjusting Tension on Cuttinghead Return AssemblyWrench Storage Brackets Auxiliary Table Board FacingCROSS-CUT Stop CROSS-CUTTINGMiter Cutting Ripping Compound Miter CuttingOUT-RIPPING IN-RIPPINGConstructing a Push Stick PushstickService Troubleshooting Guide MaintenanceWarranty AccessoriesPage Page Canadian PORTER-CABLE Delta Service Centers