Porter-Cable 33-413, 33-400, 33-422, 33-423), 33-421, 16 Cuttinghead and CROSS-CUT Stop to TRACK-ARM

CUTTINGHEAD AND CROSS-CUT STOP TO TRACK-ARM

1.Remove two screws (A) and end cap (B) from track- arm, Fig. 8.

2.Hold cuttinghead assembly (D) Fig. 9, with both hands and insert the ball bearings (E) into the track- arm, as shown. Push cuttinghead all the way onto track-arm and tighten clamp knob (F).

3.Assemble cross-cut stop (C) to the track-arm (Fig. 10).

4.Replace end cap (B) that was removed in STEP 1 (Fig. 11).

Fig. 8

F

E

D

Fig. 9

Fig. 10

Fig. 11

9