Powermatic PM2700 Assembly, Electrical Connections, Mounting the Fence, General Information

Page 9

Cleaning

Exposed metal surfaces, such as the table top and extension wings, have been given a protective coating at the factory. This should be removed with a soft cloth moistened with kerosene. Do not use acetone, gasoline, or lacquer thinner for this purpose. Do not use solvents on plastic parts, and do not use an abrasive pad because it may scratch the surfaces.

Assembly

Mounting the Fence

Referring to Figure 2:

1.

Place the fence assembly (A) on the table (B),

 

 

lining up the four mounting holes (C) on the

 

 

bracket with the threaded holes (D) on the rear

 

 

of the table above the dust port (E).

 

2.

Hand fasten with four each M10 hex socket

 

 

cap screws (F) and M10 lock washers (G). Do

 

 

not tighten at this time.

 

3.

Place two M13 flat washers (H) on two lock

 

 

handles (J). Insert the lock handles through

 

 

slots (K) on each side of the base. Partially

 

 

thread the lock handles (J) into two mounting

 

 

holes (L) on the table. Do not tighten at this

Figure 2

 

time.

 

 

4.

Turn the adjust knob on the bracket to position

 

 

the fence all the way to the rear.

 

5.

Tighten the lock handles (J) sufficiently to

 

 

prevent the fence from movement.

 

Electrical Connections

Electrical connections must be made by a qualified electrician in compliance with all relevant codes. This machine must be properly grounded to help prevent electrical shock and possible fatal injury.

General Information

A power plug is not provided with the Model PM2700. You may either connect the proper UL/CSA listed plug or “hardwire” the machine directly to your electrical panel provided there is a disconnect near the machine for the operator. Consult electrical drawings at the back of this manual for further clarification of wiring setup.

9

Image 9
Contents Model PM2700 Shaper Warranty Period Warranty and ServiceTable of Contents Page Page Figure a Introduction Specifications Installing Shipping ContentsUnpacking Electrical Connections AssemblyMounting the Fence General InformationExtension Cords Voltage Conversion 3 Phase Shaper onlyAdjustments Fence Assembly MovementHandwheel Adjustments Coplanar Adjustment Coplanar AlignmentVerifying that fences are coplanar Loosen the outfeed fence lock knob B Ram Dial CalibrationSpindle Gib Adjustment Featherboard Hold-downsLoosen lock handles C and lock knobs D Spindle Assembly Removal Spindle Assembly InstallationInstalling the Spindle Assembly Locking the ArborRouter Collet Optional Installation Shaper Cutter InstallationInstalling the Shaper Cutter Locking the SpindleBelt Replacement Changing Cutter SpeedDrive Belt Tension Loosen lock handle a Precision Miter GaugeOperating Controls Start/StopDigital Readout Operations Safety DevicesOverview Grain Direction ConsiderationsUsing the Fence Dimension Depth of CutStraight Edge Shaping End Shaping Edge ShapingShaping All Sides On-Edge ShapingContour Edge Shaping With Collar Bearing Straight Line Bevel ShapingPosition of Collars Shaping With CollarsStarting Pin Enclosed Edge Shaping Arcs and CirclesSecuring the Template TemplatesSpecial Cuts Stacked CuttersSash and Door Shaping Glue Butt Joint Butt JointsTongued Joint Drop Leaf JointTenoning See also Unsatisfactory Cuts Troubleshooting for PM2700 ShaperTrouble Possible Cause Remedy Optional AccessoriesParts Ordering Replacement Parts Table Parts ListTable Assembly Drawing Fence Parts List Fence Assembly Drawing Frame and Motor Parts List Frame and Motor Assembly Drawing Elevator Parts List Elevator Assembly Drawing Caster Assembly Parts List Caster Assembly Drawing Spindle Assembly Parts List Spindle Assembly Drawing Cabinet and Base Parts List PM2700-450 Cabinet and Base Diagrams 230V, 1Phase Magnetic Switch5HP, 230V, 3Phase Magnetic SwitchMotor 5HP, 460V, 3PhaseNew Sanford Road LaVergne, TN Phone

PM2700 specifications

The Powermatic PM2700 is a powerful and versatile bandsaw designed to meet the needs of both professional woodworkers and enthusiastic hobbyists. This robust machine is known for its exceptional cutting performance, advanced features, and user-friendly design.

One of the standout characteristics of the PM2700 is its impressive motor. Equipped with a 3 HP, 230-volt motor, the bandsaw delivers ample power, ensuring that users can tackle even the most challenging materials with ease. The motor operates smoothly and quietly, which enhances the overall working experience.

The PM2700 features a precision-engineered cast iron frame, which provides stability and reduces vibration during operation. The cast iron table is a generous 21 inches by 27 inches, supporting large workpieces while maintaining accuracy in cuts. Additionally, the table incorporates a high-quality, tilting feature that allows for bevel cuts, expanding the functionality of the bandsaw.

An essential aspect of any bandsaw is its cutting capacity, and the PM2700 excels in this area. It offers a resaw capacity of 12 inches, allowing woodworkers to easily slice through thick material. The machine also features an adjustable blade tensioning system that enables quick and precise adjustments to achieve optimal blade performance.

The PM2700 is equipped with an advanced blade tracking system, which helps in maintaining correct blade alignment during operations. This feature significantly reduces the risk of blade wandering, resulting in cleaner cuts and enhanced accuracy. The easy-to-use blade change system further simplifies maintenance, allowing users to switch blades with minimal effort.

Another notable technology integrated into the PM2700 is the built-in digital readout that provides real-time feedback on blade height adjustments. This digital feature ensures that woodworkers can make precise and repeatable cuts with confidence.

For safety, the bandsaw comes with several important features, including a blade guard and quick-release mechanism. Additionally, its robust construction minimizes the risk of injuries associated with vibrations and instability.

Overall, the Powermatic PM2700 is a top-of-the-line bandsaw that combines power, precision, and safety features, making it an excellent choice for anyone serious about woodworking. With its heavy-duty construction and user-friendly design, it promises to deliver outstanding results and durability for years to come.