Powermatic PM2700 operating instructions Special Cuts, Stacked Cutters, Sash and Door Shaping

Page 29

Special Cuts

The illustrations in this section show the profile, or section, views made by the cutter(s). The most efficient cutters are carbide tipped to ensure clean and long-term cutting. Small cutters may be solid carbide, and some use inserts. Since there are such a wide variety of choices, the operator is limited only by his experience and imagination.

Stacked Cutters

A variety of interesting and timesaving cuts can be made in a single setup by stacking the cutters. When the operator stacks the cutters, extra care should be taken to see that all parts are clean, free of nicks and flaws, and perfectly balanced in the stacked position.

Sash and Door Shaping

Shaping a door requires two operations.

Figure 53 shows the sash cut for the first operation.

Figure 54 shows the stock flipped over and the sash cutter used with a 1/4 inch groove cutter to complete the cut.

Figure 55 shows the first shaping cut with the sash cutter for the matching door stile sash.

Figure 56 shows the same cut with the stock flipped over.

Figure 57 shows the first shaping cut for a window sash stile utilizing a sash cutter, collar, and a 1/2 inch groove cutter.

Figure 56

Figure 53

Figure 54

Figure 55

Figure 57

29

Image 29
Contents Model PM2700 Shaper Warranty Period Warranty and ServiceTable of Contents Page Page Figure a Introduction Specifications Unpacking InstallingShipping Contents Electrical Connections AssemblyMounting the Fence General InformationExtension Cords Voltage Conversion 3 Phase Shaper onlyHandwheel Adjustments AdjustmentsFence Assembly Movement Verifying that fences are coplanar Coplanar AdjustmentCoplanar Alignment Loosen the outfeed fence lock knob B Ram Dial CalibrationLoosen lock handles C and lock knobs D Spindle Gib AdjustmentFeatherboard Hold-downs Spindle Assembly Removal Spindle Assembly InstallationInstalling the Spindle Assembly Locking the ArborRouter Collet Optional Installation Shaper Cutter InstallationInstalling the Shaper Cutter Locking the SpindleDrive Belt Tension Belt ReplacementChanging Cutter Speed Loosen lock handle a Precision Miter GaugeDigital Readout Operating ControlsStart/Stop Operations Safety DevicesOverview Grain Direction ConsiderationsUsing the Fence Straight Edge Shaping DimensionDepth of Cut End Shaping Edge ShapingShaping All Sides On-Edge ShapingContour Edge Shaping With Collar Bearing Straight Line Bevel ShapingPosition of Collars Shaping With CollarsStarting Pin Enclosed Edge Shaping Arcs and CirclesSecuring the Template TemplatesSash and Door Shaping Special CutsStacked Cutters Glue Butt Joint Butt JointsTongued Joint Drop Leaf JointTenoning See also Unsatisfactory Cuts Troubleshooting for PM2700 ShaperTrouble Possible Cause Remedy Optional AccessoriesParts Ordering Replacement Parts Table Parts ListTable Assembly Drawing Fence Parts List Fence Assembly Drawing Frame and Motor Parts List Frame and Motor Assembly Drawing Elevator Parts List Elevator Assembly Drawing Caster Assembly Parts List Caster Assembly Drawing Spindle Assembly Parts List Spindle Assembly Drawing Cabinet and Base Parts List PM2700-450 Cabinet and Base Diagrams 230V, 1Phase Magnetic Switch5HP, 230V, 3Phase Magnetic SwitchMotor 5HP, 460V, 3PhaseNew Sanford Road LaVergne, TN Phone

PM2700 specifications

The Powermatic PM2700 is a powerful and versatile bandsaw designed to meet the needs of both professional woodworkers and enthusiastic hobbyists. This robust machine is known for its exceptional cutting performance, advanced features, and user-friendly design.

One of the standout characteristics of the PM2700 is its impressive motor. Equipped with a 3 HP, 230-volt motor, the bandsaw delivers ample power, ensuring that users can tackle even the most challenging materials with ease. The motor operates smoothly and quietly, which enhances the overall working experience.

The PM2700 features a precision-engineered cast iron frame, which provides stability and reduces vibration during operation. The cast iron table is a generous 21 inches by 27 inches, supporting large workpieces while maintaining accuracy in cuts. Additionally, the table incorporates a high-quality, tilting feature that allows for bevel cuts, expanding the functionality of the bandsaw.

An essential aspect of any bandsaw is its cutting capacity, and the PM2700 excels in this area. It offers a resaw capacity of 12 inches, allowing woodworkers to easily slice through thick material. The machine also features an adjustable blade tensioning system that enables quick and precise adjustments to achieve optimal blade performance.

The PM2700 is equipped with an advanced blade tracking system, which helps in maintaining correct blade alignment during operations. This feature significantly reduces the risk of blade wandering, resulting in cleaner cuts and enhanced accuracy. The easy-to-use blade change system further simplifies maintenance, allowing users to switch blades with minimal effort.

Another notable technology integrated into the PM2700 is the built-in digital readout that provides real-time feedback on blade height adjustments. This digital feature ensures that woodworkers can make precise and repeatable cuts with confidence.

For safety, the bandsaw comes with several important features, including a blade guard and quick-release mechanism. Additionally, its robust construction minimizes the risk of injuries associated with vibrations and instability.

Overall, the Powermatic PM2700 is a top-of-the-line bandsaw that combines power, precision, and safety features, making it an excellent choice for anyone serious about woodworking. With its heavy-duty construction and user-friendly design, it promises to deliver outstanding results and durability for years to come.